Axle removal

[dyna-ti]

Mine neither,as far as i can make out its a smooth axle with possible a bulged section towards the middle,hence finding out which way it knocks through it so important

 

[big.eck]

right , where the qr goes through the axle one side should be threaded...... screw a bolt into it (any v-brake/canti mounting bolt will do) clamp the bolt head onto a vice and tap the hub away from the bolt .

well it works with the fatso hubs

er I don't think my FatSo, Suspension or Normal front hubs or Ti-Glide rear is threaded in the axle :?

just 1 side on mine is :?

 

[FluffyChicken]

right , where the qr goes through the axle one side should be threaded...... screw a bolt into it (any v-brake/canti mounting bolt will do) clamp the bolt head onto a vice and tap the hub away from the bolt .

well it works with the fatso hubs

er I don't think my FatSo, Suspension or Normal front hubs or Ti-Glide rear is threaded in the axle :?

just 1 side on mine is :?

Well what do you know, the FatSo I have does. Ti-Glide (same as dyna-ti's with the wavey flanges, though none disc type doesn't.

 

[alanf]

can I suggest a bigger hammer?

 

[big.eck]

right , where the qr goes through the axle one side should be threaded...... screw a bolt into it (any v-brake/canti mounting bolt will do) clamp the bolt head onto a vice and tap the hub away from the bolt .

well it works with the fatso hubs

er I don't think my FatSo, Suspension or Normal front hubs or Ti-Glide rear is threaded in the axle :?

just 1 side on mine is :?

Well what do you know, the FatSo I have does. Ti-Glide (same as dyna-ti's with the wavey flanges, though none disc type doesn't.

mine is a non disc hub with the thread inside , must be the older ones ? :?

any progress yet ?

 

[dyna-ti]

[/quote] any progress yet ?

Yes,my local mechanic will have a look at it Thursday

 

[big.eck]

well if he has no luck then give me a shout