I have a mint condition one ride old avid elixir brake set including but not shown 180mm discs and bleed kit, the rear pipe was fitted through the fame eyes so the calliper and olive were removed to remove from the bike, getting the olive back on was fiddly and pushed some of the outer pipe backwards, mentioning it in case you need to do the same to fit on your bike and find you need to replace the olive but the brake was tested and seems to be working fine,
got some bits and bobs laying about so going to throw together a single speed steed if I can source a frame and forks,
im looking to swap for a v / canti brake only frame and fork set, kona, cannondale,ect idealy looking for a thin tubed light weight steel frame with straight leg forks like project 2,
may consider something in aluminium with large tubing and forks to suit,
paintwork is not priority but no dings dents chain suck or if alloy no deep scratches ( may want to polish )
size wise Im looking for a 20 inch ctc with a top tube of circa 22 inches ctc
pre 97 would also be a bonus but lets see wots on offer
got some bits and bobs laying about so going to throw together a single speed steed if I can source a frame and forks,
im looking to swap for a v / canti brake only frame and fork set, kona, cannondale,ect idealy looking for a thin tubed light weight steel frame with straight leg forks like project 2,
may consider something in aluminium with large tubing and forks to suit,
paintwork is not priority but no dings dents chain suck or if alloy no deep scratches ( may want to polish )
size wise Im looking for a 20 inch ctc with a top tube of circa 22 inches ctc
pre 97 would also be a bonus but lets see wots on offer
