Anyone running Grafton Joystix

[scant]

Or shim it with washers until it's right then measure the thickness of the washer stack.

its finding washers that 1/2 fit thats the problem due to the confined space!
if the depth is too much they dont clear the tabs.. but hey essentially right & an easy fix

 

[cherrybomb]

Normally I'd agree, but looking at that photo there's plenty of room if you're doing the middle ring. There doesn't look to be a shoulder on the back of the spider.

I'm not suggesting that it's a permanent fix, just a way of finding the size of spacers you need to make.

 

[B3]

I've found the bag of washers and bolts that came of these, the spacers are 1.5mm.

 

[andy.l]

Ok,ive just made a set of 2mm spacers,ill start with these and see how it goes,thanks for the good info chaps.

 

[andy.l]

Heres the pic before the spacers,see how close the inner ring is to the middle...

2mm spacers fitted,looks a lot better spacing,gotta see when its set up if the gaps correct.