I've got these bits I found on a recent tidy up. All these are links to the pics. I'll take Paypal or POs. Postage will be added at cost.
XT Brake hoods £4 ***SOLD pending payment***
Tioga R/hand brake lever grip (I managed to split the left one years ago) £2
Cinelli bar plugs from something like Spinaccis or the clip-on tribars £2
A pair of Force40 cams with straddle wire (one black and one silver) £5
Set of Onza HOX medium cages and bolts. Unfortunately I can only locate 7 of the 8 countersunk bolts. One of the cages is slightly bent and they are all scratched to some degree. I've also included a set of the blanking bolts if you don't use the cages. £5
Hope disc hub spacer. I believe that this is the spacer used on the old splined disc hubs when you're not running a disc (I could be wrong though). £1
A NOS packet of SRP bolts used to replace the steel bolts on a Syncros seatpost. They will fit a USE post but are a tad shorter than the originals. The size is M5 x 0.8 x 35mm. £5 ***SOLD***
SRP Ti seatbolt twin 5mm allen key type. I have cut this one down. The shaft of the bolt measures 25mm long with 11mm of thread. £4
Syncros stem bolt and wedge from a road stem. The shaft of the bolt is 120mm long with 42mm of thread. The wedge is 22.2mm diameter. £5
Onza HO bearings bnip. I have 5 sets of these. £4 per set. ***SOLD***
Onza HO guide plate kit bnip. I have 2 sets of these. £4 per set. ***SOLD***
Onza retention plate kit bnip. £4 ***SOLD***
Magura DH brake booster bnip with spacers and bolts. £10 ***SOLD***
Red canti bridges. These aren't the Ringle ones, just copies. I have one pair. £5 for the two. ***SOLD***
Wellgo SPD-R pedals. A bit scratched but the bearings have no play at all and are still smooth. Unfortunately I don't have any cleats for these but they should be fairly easy to find. £10 ***SOLD***
Cinelli Eubios bars. 40cm width. 26.4mm diameter. These are from 94/95 and have been well used. Most of the scratches will be covered by the bar tape. I have shortened the ends of the drops by about 1 inch each side. They have never been crashed. £10
Cinelli stem. The stem is 100mm long with a 26.4 bar bore. 22.2mm quill diameter. This is the stem that I had the Eubios bars in and is a 94/95 model. Unfortunately I haven't got the black plastic cap to fit over the stem bolt. £10 ***SOLD***
Bottle cage adapter. This adapter converts a single behind the saddle bottle cage mount into a two cage mount. Ideal for longer TT or Tri events. £5 ***SOLD pending payment***
That's it for the mo. I'll post more stuff as I find it.
XT Brake hoods £4 ***SOLD pending payment***
Tioga R/hand brake lever grip (I managed to split the left one years ago) £2
Cinelli bar plugs from something like Spinaccis or the clip-on tribars £2
A pair of Force40 cams with straddle wire (one black and one silver) £5
Set of Onza HOX medium cages and bolts. Unfortunately I can only locate 7 of the 8 countersunk bolts. One of the cages is slightly bent and they are all scratched to some degree. I've also included a set of the blanking bolts if you don't use the cages. £5
Hope disc hub spacer. I believe that this is the spacer used on the old splined disc hubs when you're not running a disc (I could be wrong though). £1
A NOS packet of SRP bolts used to replace the steel bolts on a Syncros seatpost. They will fit a USE post but are a tad shorter than the originals. The size is M5 x 0.8 x 35mm. £5 ***SOLD***
SRP Ti seatbolt twin 5mm allen key type. I have cut this one down. The shaft of the bolt measures 25mm long with 11mm of thread. £4
Syncros stem bolt and wedge from a road stem. The shaft of the bolt is 120mm long with 42mm of thread. The wedge is 22.2mm diameter. £5
Onza HO bearings bnip. I have 5 sets of these. £4 per set. ***SOLD***
Onza HO guide plate kit bnip. I have 2 sets of these. £4 per set. ***SOLD***
Onza retention plate kit bnip. £4 ***SOLD***
Magura DH brake booster bnip with spacers and bolts. £10 ***SOLD***
Red canti bridges. These aren't the Ringle ones, just copies. I have one pair. £5 for the two. ***SOLD***
Wellgo SPD-R pedals. A bit scratched but the bearings have no play at all and are still smooth. Unfortunately I don't have any cleats for these but they should be fairly easy to find. £10 ***SOLD***
Cinelli Eubios bars. 40cm width. 26.4mm diameter. These are from 94/95 and have been well used. Most of the scratches will be covered by the bar tape. I have shortened the ends of the drops by about 1 inch each side. They have never been crashed. £10
Cinelli stem. The stem is 100mm long with a 26.4 bar bore. 22.2mm quill diameter. This is the stem that I had the Eubios bars in and is a 94/95 model. Unfortunately I haven't got the black plastic cap to fit over the stem bolt. £10 ***SOLD***
Bottle cage adapter. This adapter converts a single behind the saddle bottle cage mount into a two cage mount. Ideal for longer TT or Tri events. £5 ***SOLD pending payment***
That's it for the mo. I'll post more stuff as I find it.
