nausea
Retro Guru
For sale is my small Klein Pinnacle fuselage. It is freshly painted in my own take on the Rainforest scheme - same pattern and technique - different colour pallette. Including primer, undercoat, topcoat and clear coat there's over 12 coats of paint on there.
The frame is a 1992 in good nick with brand new BB bearings. A couple of issues to be aware of though...
The front two cable inlets on the down tube have ferrules stuck in them so you could either have a go at removing them yourself or just install the cables without ferrules. Only one of the internal cable routings has the plastic inner sleeve installed so you would have to supply that (I have some somewhere but can't for the life of me find them). The bottle bosses were toast so I opted to fill and paint over them.
Headset is a brand new green Tange Technoglide. The top cap is not the one that came with the headset as the stem (a modern Answer A-Tac) is a shimmed 1 1/8".
The fork is an Exotic Alloy. Although only pictured in one of the photos, I will supply a brand new pair of Pace bolt-on brake boss mounts (note: they do fit properly - the photo shows them only loosely attached).
Difficult to know how to price this because it depends how much you value the paint job which is pretty subjective but I'll start it off at £275 posted and see what happens (£15 off if you don't want the brake mounts).
Thanks for looking!
The frame is a 1992 in good nick with brand new BB bearings. A couple of issues to be aware of though...
The front two cable inlets on the down tube have ferrules stuck in them so you could either have a go at removing them yourself or just install the cables without ferrules. Only one of the internal cable routings has the plastic inner sleeve installed so you would have to supply that (I have some somewhere but can't for the life of me find them). The bottle bosses were toast so I opted to fill and paint over them.
Headset is a brand new green Tange Technoglide. The top cap is not the one that came with the headset as the stem (a modern Answer A-Tac) is a shimmed 1 1/8".
The fork is an Exotic Alloy. Although only pictured in one of the photos, I will supply a brand new pair of Pace bolt-on brake boss mounts (note: they do fit properly - the photo shows them only loosely attached).
Difficult to know how to price this because it depends how much you value the paint job which is pretty subjective but I'll start it off at £275 posted and see what happens (£15 off if you don't want the brake mounts).
Thanks for looking!
