68mm BB wanted and Crank arms

rearwheel

Retro Guru
Hi, I'm after a 68mm BB for my Specialized Allez (MPN 9010-7156, 9010-7256).

Also, crank arms. My current set are 175mm but don't mind slightly smaller.

Cheers.
 
what sort of thing are you looking for? I have some 170mm shimano 1050 crank arms that need a good polish, and can probably find a BB to suit, might be cup and cone though.

need to check postage weight, will say 30 GBP posted for now but will probably be less
 
I'm open to suggestions. I was thinking maybe a 'sexier' Octalink fitting but then that'd require corresponding crank arms, which'd be more expensive. So, probs vanilla square taper is safer.
 
Hi, bump.

Deja vu. Just damaged my allen key trying to tighten the left crank arm, which keeps coming loose - presumably because the hole on the crank arm is a bit worn and/or the left side of the bottom bracket is worn too? Wiser to buy a new set than damaging allen keys 😅

Also, I'm not sure of the BB length and so the BB would have to be right for the above frame. Ta.
 
Back
Top