Fancy giving the 27.5" wheel thing a go but your old back end is a little tight - then here we go... The front wheel is 27.5" and the rear 26" - and the front wheel really does roll better. It's not just in the head. Will also slightly slacken your head angle, but it's not such a radical change as to screw anything up. I like the effect it has.
Hope Pro 2 built up with Velocity p35 (35mm wide tubeless friendly rims) using 32 DT comp spokes. They are strong, pretty light and in very good condition. There are the usual signs of use on the freehub body.
The great thing about these rims is that the width of them makes a 2" tyre come up more like a 2.3" when seated. There is a slight gain in rim weight but a big saving on tyre weight.
I can supply QR, 15 or 20mm adapters for the front. Rear is 135mm x 10mm at present but you can buy adapters easily.
£145 delivered for the wheels or £170 with the Geax Saguaro tubeless tyres and Stan's valves.
Thanks
Rich
Hope Pro 2 built up with Velocity p35 (35mm wide tubeless friendly rims) using 32 DT comp spokes. They are strong, pretty light and in very good condition. There are the usual signs of use on the freehub body.
The great thing about these rims is that the width of them makes a 2" tyre come up more like a 2.3" when seated. There is a slight gain in rim weight but a big saving on tyre weight.
I can supply QR, 15 or 20mm adapters for the front. Rear is 135mm x 10mm at present but you can buy adapters easily.
£145 delivered for the wheels or £170 with the Geax Saguaro tubeless tyres and Stan's valves.
Thanks
Rich
