Proto2000
Retro Guru
Snagged this last week for a song. 40 minute drive but worth the time and fuel to get it. It was dirty, had some parts that were lower end and needed a few adjustments to make it something I would ride. I had the seat post, tires, XT derailleurs, LX crankset and V-brakes for the upgrades. Brifters, wheels, fork, stem, saddle and bars/grips were already on it so just a clean, wax, new cables/housing and pack all bearings then good to go. I do have a Hell Bent Titec bar that matches the post but is a bit heavy, so not wanting to put it on the bike. Almost identical to the Kona Fire Mountain I posted recently but with a suspension fork, dimensions/geometry are similar about 1/4" all around. Really unsure of the year only because the paint on BB is so thick I cannot make out the serial number. S seat stays if that makes a difference.
Attachments
-
20250906_092702.webp640.4 KB · Views: 19
-
20250906_092710.webp356.3 KB · Views: 14
-
20250906_092713.webp381 KB · Views: 11
-
20250906_092726.webp366.6 KB · Views: 12
-
20250906_092736.webp384.9 KB · Views: 11
-
20250906_092747.webp436.4 KB · Views: 14
-
20250906_092810.webp628.5 KB · Views: 14
-
20250826_113307.webp677.6 KB · Views: 21