BOTH FRAME AND CRANKS SOLD
17.5" Rocky Mountain Blizzard frame in Tange Ulimate Ultralight steel.
Keep the lovely patina or do a resto...
The frame has quite a few rust spots, the worst being on the down tube. I’ve tapped around with a hammer and sanded down an area to check it, it's solid underneath. I also had to cut a stuck seat post out of it, but I was extremely careful and I don’t think the frame suffered.
Other than that it’s fine - BB threads, head tube, etc. Naturally the RM sloping seat collar is included, I’ll also throw in the original 130mm RM cro-mo stem.
I also have the original Race Face cranks to go with it. They’re in a similar condition to the frame, tatty with a few marks on, but function fine (tapers and threads). They’re 110 BCD, 170mm long and fit on a 122mm axle. £40 without granny ring spacers/bolts or £55 with (I have three pairs of RF cranks and only two sets of these...
)
At the moment the cranks are only for sale with the frame.
Approximate measurements:
Seat tube: CC 13.5" / CT 17.5"
Actual top tube: 21.5"
Serial nr: BLA1249
Frame £75
Frame and cranks £115
Frame and cranks with granny ring spacers/bolts £130
-Plus £35 European postage from Sweden (anywhere else please ask)
Payment Paypal gift, or cheque from the UK.
Thread: http://www.retrobike.co.uk/forum/viewtopic.php?t=102584
17.5" Rocky Mountain Blizzard frame in Tange Ulimate Ultralight steel.
Keep the lovely patina or do a resto...
The frame has quite a few rust spots, the worst being on the down tube. I’ve tapped around with a hammer and sanded down an area to check it, it's solid underneath. I also had to cut a stuck seat post out of it, but I was extremely careful and I don’t think the frame suffered.
Other than that it’s fine - BB threads, head tube, etc. Naturally the RM sloping seat collar is included, I’ll also throw in the original 130mm RM cro-mo stem.
I also have the original Race Face cranks to go with it. They’re in a similar condition to the frame, tatty with a few marks on, but function fine (tapers and threads). They’re 110 BCD, 170mm long and fit on a 122mm axle. £40 without granny ring spacers/bolts or £55 with (I have three pairs of RF cranks and only two sets of these...
)At the moment the cranks are only for sale with the frame.
Approximate measurements:
Seat tube: CC 13.5" / CT 17.5"
Actual top tube: 21.5"
Serial nr: BLA1249
Frame £75
Frame and cranks £115
Frame and cranks with granny ring spacers/bolts £130
-Plus £35 European postage from Sweden (anywhere else please ask)
Payment Paypal gift, or cheque from the UK.
Thread: http://www.retrobike.co.uk/forum/viewtopic.php?t=102584
