1993? Rocky mountain Nimbus.

[wiggviv]

Worth the money even with weld

My thoughts it's a gamble not going to be a show bike my favourite ride is a battered Orange esix.
Worth the money even with weld

 

[JoniMarin]

I am the winning bidder picking up tomorrow.
My first RM any input appreciated always drooled over them.
I will have a proper look over and get some pics posted.
Another Easton aluminium in the collection.

Good work - even with the weld I think well worth the outlay!

 

[Braggard]

The weld looks slap dash but if believed, it stopped further damage. A decent aluminium welder could probably clean that up and carry out a professional repair if the current job bugs you. Personally the bike and the kit on it, makes a good purchase.

 

[wiggviv]

Hi I agree with

The weld looks slap dash but if believed, it stopped further damage. A decent aluminium welder could probably clean that up and carry out a professional repair if the current job bugs you. Personally the bike and the kit on it, makes a good purchase.

the weld I'll look at the repair redo guess it could weaken with more welding. I think the seat post is not inserted to correct depth resulting in damage.

 

[FluffyChicken]

It was a common problem on the early Alu Rockies , same on the Stratos, Cirrus, Experience.

You'll probably find the seat post is 400mm long, as it's a Syncros early one, so goes a long way in.

What do you need to know, if I was local I would have had it too.

 

[wiggviv]

It was a common problem on the early Alu Rockies , same on the Stratos, Cirrus, Experience.

You'll probably find the seat post is 400mm long, as it's a Syncros early one, so goes a long way in.

What do you need to know, if I was local I would have had it too.

I am looking at the catalogues and getting info together and picking up tomorrow - the buyer (orininal) sounds ok too. I have a couple of Easton Elite frames and rate the ride feel. I will post up pics and go slowly on this one try to keep it used look and decals. I would be interested if I could find the builder and welder from the frame no. I have a few on the go Orange and Marin + a Park Pre Team 925.

It was a common problem on the early Alu Rockies , same on the Stratos, Cirrus, Experience.

You'll probably find the seat post is 400mm long, as it's a Syncros early one, so goes a long way in.

What do you need to know, if I was local I would have had it too.

Thanks - I am looking at the catalogues and getting info together and picking up tomorrow - the buyer original owner sounds ok too. I have a couple of Easton Elite frames and rate the ride feel. I will post up pics and go slowly on this one try to keep it used look and decals. I would be interested if I could find the builder and welder from the frame no. I have a few on the go Orange P7 and Marin PIne Mountain + a Park Pre Team 925

 

[wiggviv]

I am looking at the catalogues and getting info together and picking up tomorrow - the buyer (orininal) sounds ok too. I have a couple of Easton Elite frames and rate the ride feel. I will post up pics and go slowly on this one try to keep it used look and decals. I would be interested if I could find the builder and welder from the frame no. I have a few on the go Orange and Marin + a Park Pre Team 925.

Thanks - I am looking at the catalogues and getting info together and picking up tomorrow - the buyer original owner sounds ok too. I have a couple of Easton Elite frames and rate the ride feel. I will post up pics and go slowly on this one try to keep it used look and decals. I would be interested if I could find the builder and welder from the frame no. I have a few on the go Orange P7 and Marin PIne Mountain + a Park Pre Team 925

 

[FluffyChicken]

You'll want to be on Facebook and the Canadian Bike group.
It'll probably have a Yxxxx serial on the rear dropout, actually no, these where made locally not in Japan.
It's been a long time since I remember talking about them

I don't think they where making the Alu frame themselves at this point. But not sure?

A few in that group where working there then.

Anyway, check for the Easton sticker too.
A rare find over in Canada let alone over here. Very little was in the county in 1991, I have one of only 7 Altitude that year to be in the country, think kicked of more in 92/93.