sq_root_of_2
Retro Guru
- Feedback
- View
Just the frame and original stem all built by Tom Teesdale.
It is has been well used and it should be repainted. Lots of chips.
Chain suck area had some gouges so I had it spray welded, this involves spraying metal on at low temperature to build up the area. It can be removed if you want by filing it off. It is a good fix for this type of issue on a frame. Once finished you can never tell it was done. This process is used for the restoration of cars.
The frame is all fillet brazed and has some nice details on the seat cluster. Has a pump mount.
BB is included but needs to be installed.
The price delivered to Europe is $275 US or 174 pound or 211 Euro. It is being shipped from the States.
Paypal gift or UK bank transfer.
This would make a nice project. I do have all of the bits to make this original with the exception of the fork.
Measurements:
Top Tube = 19.5 inches or
Seat Tube Center to Center = 16 inches
Seat Tube Center to Top = 17 inches
Heat Tube = 3. 75 inches
It is has been well used and it should be repainted. Lots of chips.
Chain suck area had some gouges so I had it spray welded, this involves spraying metal on at low temperature to build up the area. It can be removed if you want by filing it off. It is a good fix for this type of issue on a frame. Once finished you can never tell it was done. This process is used for the restoration of cars.
The frame is all fillet brazed and has some nice details on the seat cluster. Has a pump mount.
BB is included but needs to be installed.
The price delivered to Europe is $275 US or 174 pound or 211 Euro. It is being shipped from the States.
Paypal gift or UK bank transfer.
This would make a nice project. I do have all of the bits to make this original with the exception of the fork.
Measurements:
Top Tube = 19.5 inches or
Seat Tube Center to Center = 16 inches
Seat Tube Center to Top = 17 inches
Heat Tube = 3. 75 inches
