Wanted 1" quill stem

[Tootyred]

Hi. Im looking for a 1" steerer 22.2mm quill stem. 80mm reach @10o. 25.4 bars..preferred black, but i can spray.

Or slightly longer if higher angle...which might be better.

Needs a fairy long quill as im trying to get some bars up.

I will try to post up a picture of the set up using a horrid adaptor and ahead abomination to give you a better idea.....

But if you have anything let me know.

 

[Tootyred]

Here we go...

 

[Spankyfart]

Will this do.
Nitto/Miyata seems like that's a bout right seeing your setup.
One vgc, other discoloured and had some rusty crud so I sanded and sprayed some leftover black paint to protect. Should come off with thinner (or whateveryjooswouldcallthat)

 

[Tootyred]

That's the kinda thing that would do. Ive got a longer version, but that's 130mm which is way too long!

Are the 80mm c to c or actual 80mm reach? Obviously the angle shortens the reach quite a bit.

 

[Spankyfart]

I'd have to measure tomorrow for complete dimensions.

 

[Tootyred]

If they are 30o which i thin mt10 are, they would need to be 120mm long to fit.