Search results

:D

Mine

For Information. Eventually found that an M4 x 20 bolt fitted perfectly.

Hi Does anybody know what size the bolt is used in the Kona Control Center headset to stop it from moving. Seem to have lost mine when reinstalling :-( I have a bolt from an old Control Center /Impact headset (with the knurled grip) but this is too big for the ne I have. TIA Ken

Thanks Anthony, Got a 30.0 and it works a treat. Contacted the kona forum and asked them to double check and they confirmed 28.6 :-( That really gives me confidence. I know where I'll be asking questions in future. :-) Thanks again Ken

Fantastic - Thank you for your help. Kind regards Ken

Hi Sorry if asked before -I couldnt find it in a search. I trying to find the correct Seatpost clamp size for a '94 Kilauea. Tech support on the Kona Onwers forum advise 28.6 but this doesn't fit as too small. TIA Ken

Eventually resorted to bending the tension wire and now appear to be working fine. Thanks for the advice.

Thanks for all the help. I'll carry on fiddling and see if I can make the upper locating hole work. Otherwise may resort to bending the spring wire.

I have tried it with the pins in the upper hole. I can get the spring tension but the pad holders are not square on to the rims and there doesn't seem to be enough adjustment with domed washers on the pads to get the pads to make good contact with the rim.

Images can be found here: http://keando.pinkbike.com/album/v-brake-issue/

Sorry didn't mention it was the front brake.

The 2mm allen key ones? - no they are present.

I am rebuilding a 1994 Kona Kilauea and using the Shimano XT V Brakes (M750) but I can not seem to get any spring tension on the calipers. I have installed as per instructions. The stopper pin for the caliper arm is in the middle hole so pads are square on to the rim. The pads have been...

Hi Is the Velocity stem still available and what colour is it please - Silver or Bronze? Many thanks

Hi Interested in the following items: Kona Slim Aluminium Handle bars (x1) - £11.50 each Kona Race Light seatpost - £15 Also after a Velocity stem 110mm if one is available Many thanks

A mix of both old & new but here goes...

The recently finished 1992 Cinder Cone and my 2003 Kula. The observant ones will have noticed a couple of components that have been transplanted to the Cinder Cone... editted to show the images

Sorry GTRTS :oops: - Cherrybomb is correct the're the ones Also got the skewers of ebay :-) Cherrybomb - Thats not my kitchen I'm glad to say - its part of the inspection area where I work...

Had the respray done at Argos Cycles and got a cable stop added to the top tube at the same time so not a full length outer. Decals from Gil - Real nice job