Search results

  1. scooter

    BB Bearing cup cross threading / Drive side

    I’ve just sprayed wd40 inside round the cup . Was thinking about trying to break / shatter it by clamping it in the vice on both of the flats , hardened steel will be hard to cut I reckon ?
  2. scooter

    BB Bearing cup cross threading / Drive side

    Hi all , I’m trying to remove this bearing cup on the drive side , left handed thread . It does about one turn then starts to lock up so I’m pretty sure it’s starting to cross thread , you can see by the photos it’s a bit skee wiff . Any suggestions on how to remove it ? I’ve tried this threaded...
  3. scooter

    A Lucky lucky man today , phew !

    Thanks , yeah you see and hear about other componemt failures like forks and cranks but never think it could happen to you .
  4. scooter

    A Lucky lucky man today , phew !

    Im putting this down to a hair line crack but If anyone else is running vintage bars I’d give them a check over or better still change them for something newer. These we’re GB Randonneur‘s & I’m guessing around 1950’s or 60’s so yeah pretty bloody old but I never guessed this would happen ...
  5. scooter

    Wanted Campag super record headset spacer

    Looking for a super record headset spacer if you have one kicking around in spares box please 👍
  6. scooter

    Raleigh Dynatech Castorama

    Thanks DSH , yeah it’s seems to be a tricky one to uncover , I’ve also checked the 91 team but had no joy as yet . I’ll look into (ABC) also . Thanks for you help / input 👍
  7. scooter

    Raleigh Dynatech Castorama

    Wondered if this could be a team frame as it has the race number tab & initials on bb - AW . 91 . 56.5cm C-T 27.0mm seat pin Raleigh dropouts Frame weight 1786g Fork 666g Total 2447g
  8. scooter

    Wanted Modolo Rocky Straddle Cable , Canti’s

    🤔 , if it was a set then I think it would sell easily on ebay but not sure on a single one ? May take a while as a buy it now . I only need the yolk and straddle wires . The straddle wires on mine have two different lengths for the front and rear ( not sure which goes where but I’m guessing the...
  9. scooter

    Wanted Modolo Rocky Straddle Cable , Canti’s

    You must of known something😲, I posted this ages ago and put them away in the drawer .,Then yesterday decided I wanted to use them on a build so I knocked up some bits and bobs and got them running again . Is yours black ? And how much are you wanting? Thanks Scott
  10. scooter

    Raleigh Competition 1985 Build

    Great stuff & good to know 👍 , I’d give it a go if I found a suitable fork , & totally get ya about swapping quill stems for a few mm + or - , right old faff 🥴
  11. scooter

    Raleigh Competition 1985 Build

    Curious to know , is the machined top nut a nice snug fit over the steerer tube or is that what the o-ring is for ? And do the spacers push down to on the O-ring to remove any play . Those standard 1 1/8 split tapered washers do a good job of removing any play so i just wondered how yours...
  12. scooter

    What are these BMX’s??

    Oxford postcode stamped on bb .
  13. scooter

    What are these BMX’s??

    Not sure on the bottom one , the gusset Is similar to an ammaco or puch and early mongooses but it’s definatley not a mongoose . The welds don’t look very tidy so I’d imagine a fairly low end frame . The rear drop out shape would be the best way to identify I think .
  14. scooter

    Wanted Modolo Rocky Straddle Cable , Canti’s

    A very long shot but no harm in asking , I’m I need of a Straddle cable & yoke to suit my Modolo Rocky Canti’s so I can use them again . as below - & thanks for looking And yes we can trade for Crumpets 👍
  15. scooter

    Wanted Cinelli stem bar clamp bolt

    80 or 90mm pref.
  16. scooter

    Wanted Cinelli stem bar clamp bolt

    Hi & thanks for this offer , I’m sure I can work out something with both stems as I do have a couple of long bolts and expanders , May even be able to insert a notch to fit your bolt ? I’ll message you my details for postage address and for the cost . thanks for helping 👍
  17. scooter

    Wanted Cinelli stem bar clamp bolt

    Ah thanks for this info , that’s explains it bottoming out and lock up 👍
  18. scooter

    Wanted Cinelli stem bar clamp bolt

    Hi all , wondered if anyone has a spare tightening bolt like this please ? This one seized up so I had to cut it to remove . I thought a seat bin bolt might work but the diameter is smaller . Thanks Scott .
  19. scooter

    Wanted Bar ends , cane creek ergo

    Hi all , Has anyone got a set of these bar ends they no longer need / use? Cane Creek ergo bar ends ( the older style ) if so please let me know as I’d like to buy , Many Thanks Scott
  20. scooter

    Wanted Campagnolo brake Caliper return spring , BR-CH006

    Any luck in your box of bits sir ?👍
Back
Top