Search results for query: *

You only need 5 threads for full strength - that's what you have with a nut. You could also run a tap down it to extend them, which is what I did. I used 8 because I could! If you are really worried, fit a brake booster to avoid a twisting force on the stud. The bike is still going strong 5...

I've done exactly that and shortened an axle. The only trick is to leave a locknut on the axle before you shorten it - removing it then clears the thread after you have tidied the end with a file. It's best to shorten the left side. You will need to redish the wheel, as the cassette always sits...

Got a basic silver Kalloy one with the hockey stick top. Barely used, minimal marks. £15 posted.

Yep, the Romany was definitely asymmetric mid-90s. However as far as I know the Harrier wasn't. The Romany took 26" (559) wheels and was aimed at heavy touring on rough roads, the Harrier at lighter stuff. My Witcomb was re-spaced by GA Cycles in Southampton as part of a renovation...

Marchisio also made Campag / Shimano fit cassettes in 9s.

(What do I know) - my view assuming it's got all the correct Campag groupset hanging off it it that it's worth around £500 were you to break it and sell it. The remainder is the value of it being a team bike and also for the rider history. Up to you whether that seems like a good deal. How much...

Oh good question! Sorry I forgot to add it. 170mm.

Suntour XCM chainset & 73mm Shimano bottom bracket to fit, £15 posted SOLD 32T Raceface narrow-wide chainring, NOS £15 posted (or the two together for £25 posted)

Black 105 5501 rear brake, complete with barely used pads and holders. No scuffs or anything. £15 posted 12-23 8 speed cassette, lightly used, £10 posted

Got one. £5 posted?

Campag and Shimano both used 5.0 mm spacing for 7s so yes, they are interoperable.

Also 'tripleiser' rings were available, a middle ring with extra long tabs which carried the inner and saved drilling the crank arms. TA certainly did them in 135mm PCD (and 130 if you like the fishing tackle stuff 🤪), not sure about 144mm.

Chorus cranks (and you need to say what year) typically took a 102mm bottom bracket. You won't find a shorter one.

Got a Kalloy sort of thing 27.0 in the shed I think - very tidy. Say £18 posted?

C&G Finishes in Liverpool (via GA Cycles) did a lovely job on my Witcomb.

The bar-ends used to come with a sticker like that!

Interestingly it's only recently that scientists have been able to demonstrate that bubbles rising in ponds can charge up and produce micro-sparks, leading to ignition of marsh gas. This phenomenon has been widely reported for centuries as Will O' the Wisps, but at last has been fully explained.

30+ years ago, my sister's Metro (in Nottingham) only used to get stolen on rainy Saturday nights.

Which would imply that aliens are so bad at flying (or their ships are so dreadfully unreliable) that it's amazing they get here at all! Alternatively, if they have the same levels of accidents as civil aviation then there are millions of them. Neither stacks up really in my mind. However, UFO...

Definitely worth saving. Tidy it up and give it a ride. Otherwise someone will happily give you £100 or so for it.