Giant MCM Team

😂 I could finish it this evening if I had the time to do so...
but finishing it to the spec I have planned however, that's a different story 😂

Yours is coming along nicely, doing a build thread for it?
 
😂 I could finish it this evening if I had the time to do so...
but finishing it to the spec I have planned however, that's a different story 😂

Yours is coming along nicely, doing a build thread for it?
Same here if I just wanted it "built" but it will be a bit of a slow process as I'm still deciding what kit I'm definitely going for.
I could do with a V brake brace for the judy xc really as I'm considering magura's.

I'm not very good at build threads, forget to take pictures, but as we are both doing mcm's I might give one a go 👍😎
 
The fork of choice has arrived, period / build correct Marzocchi XC600. Advertised as an XC500 and not working, but after a good clean up it’s in much better shape than described.
There is a very slight leak on one leg, and the stickers have had it, so it will still get a full overhaul at some point, but not yet. Came with 50% of a headset too, so somewhere out there is a frame with just the top and bottom cups…:rolleyes:
One leg stamped 94, the other 95 🤔
IMG_1033.webp
 

Attachments

  • IMG_1034.webp
    IMG_1034.webp
    69.6 KB · Views: 2
  • IMG_1035.webp
    IMG_1035.webp
    73.9 KB · Views: 1
  • IMG_1036.webp
    IMG_1036.webp
    92.1 KB · Views: 1
  • IMG_1037.webp
    IMG_1037.webp
    62.8 KB · Views: 1
  • IMG_1038.webp
    IMG_1038.webp
    59.5 KB · Views: 2
Back
Top