Recent content by eshew

The skf Fox 32mm seals, (green are the best) come with the dust seals, foam rings and foot nut crush washers. If you have flanged, stick with flanged.

Those pics are giving me vertigo. 56cm comes out to 22", does that measurement match up to the distance from the center of the bottom bracket to the center of the top tub or seat tube? Not a Litespeed or a Dean.

If they are the yellow plastic bushings (not shock eyelet bushings) you can measure and should be able to source directly from igus. But you'll need a cheap digital caliper to do it right. Figure out the dimensions and enter them in, you'll want the J grade bushings...

Just a little late... https://web.archive.org/web/20060111151540/http://www.bikes.com/bikes/2006/index.aspx

More soap, get the rim as well and spread that stuff around, if the surrounding area is lubed it'll help.

https://web.archive.org/web/20250000000000*/https://ritcheylogic.com/

Great bike! I love me some titanium. Ride the piss out of it. Nothing worse than a bike unridden.

IF it's a 97 I always recommend a 1st gen z2 or atom bomb z2. Great forks, last forever nothing to really wear out. They just go and go.

https://www.improvepart.com/products/shimano-cantilever-cartridge-brake-shoe-pad-block-set-xtr-m900-xt-m737-m70r

You should just be able to measure from the crown race to the top of the stem, that should give you an idea how close it is, more than 8mm below the top of the stem is a little sketchy.

1-1/8" is correct, you'll want to measure yours to confirm length.

Yes, both are correct, previous owner and serial. Still kicking myself for selling it, was a tad small for me, but a layback post and a OG marzocchi Z2 would have sorted that out easily. Back then I thought these grew on trees as a close friend picked up at Hei Hei in team livery around the same...

Hey that's my old frame! Sold it 10 years ago.

3m vivvid tape works well and can be found pretty easily in various widths and lengths.