26.8 seatpost

Looking for a 26.8 seatpost 350 mm or longer. Can't pay you a single penny :facepalm: as 'tis for a MacRetro challenge to build a bike using what you've got in shed. Buying not allowed. Nobody's told me I can't do swaps though

Among other bits 'n' bobs i can swap you:

Truvativ Stylo seat post 27.2mm x 350 mm - excellent condition
Thomson X4 stem - 70mm x 3.15 mm x 1.5" - looks unused, in bag
Halo Porkies skewers (white) - new and unused
Shimano XT rear skewer silver - excellent
WTB Rocket V saddle. White with black kevlar reinforcing - good
SDG Grand Prix saddle with Kona logo - ok - some wear at rear
BBB quill to ahead stem adapter - new and unused
Panaracer Cinder tyre 2.1 - very good

OTHER STEMS:
Kona Velocity bronze. 125 mm with zero rise. Logos good and nice overall condition.
Kona velocity gunmetal grey. 125 mm with slight rise. Scratch on right side but decent (clamp bolts rusty)
Ritchey Force Lite. 130 mm for 1 1/8 steerer. Slight rise. Good nick and shiny.
Ritchey Comps x 2. One at 125mm and one at 105mm (measured). Both for 25.4mm bars with slight rise.
Handsome Dog. Red. NOS. 70mm slight rise

If it gets on the road the end result (based on a Rock Lobster Team tig) will be a mess of random bits. So, as long as it fits any long 26.8 post considered.
Can send pics of above. PM me.

In hope...

Re:

I have a couple in the bits box I think, can I get back to you tomorrow eve, should have been in bed 2 hours ago as I'm working 10 hour shifts at the mo.... :facepalm:

PM me if I forget, need to check what I have out there but I think there's a Race Face one and some steel cheapy thing in black....I'm too tired to remember!!

Re:

Cheers man - you go off and get some kip eh? Let me know what swaps may be of interest and I'll take some pics.

Re:

:xmas-cool:

Should be home from work before dark today so I'll check out what I've got, and have a proper look at your swaps list...

Re:

Got a long black NC17 post in very nice condition. Think it's 400mm. Would happily swap for your stylo post as I need a 27.2 post.
Will measure the length later if of interest to you.

Rich

Re: Re:

wynne":3pkkicef said:

Got a long black NC17 post in very nice condition. Think it's 400mm. Would happily swap for your stylo post as I need a 27.2 post.
Will measure the length later if of interest to you.

Rich

Click to expand...

That's got a bit of layback I think? Might be ideal. I'll stick up some pics of the stylo at lunch time if I get a minute and see what you think. It is a T30 inline and now I look in daylight is actually 400 mm, not 350.

Re: Re:

wynne":1xa3bo1c said:

Got a long black NC17 post in very nice condition. Think it's 400mm. Would happily swap for your stylo post as I need a 27.2 post.
Will measure the length later if of interest to you.

Rich

Click to expand...

PMd you some pics of the seatpost. Drop me a pm with details and pic of NC17 if interested. cheers.

Re:

Your stylo looks good for me.
Here are some pictures of the NC17. It is 400mm long and has about 15mm of layback.

There are a few small scratches on it, but nothing deep or any serious wear.

Rich

Re:

If you two can do a deal please do, as I've only just got back in and it looks as if I'll be on long shifts for the foreseeable.... so no chance of searching through stuff in the day light :facepalm: