Reductions - Ideale, Renold, GB, Bayliss Wiley, MAFAC

Cheesedisease

Senior Retro Guru
Airlite Track Hubs / Dunlop Stainless Rims / Panaracer Tyres / Villier Cog + Extras

Bit lost amongst all these parts so moved to here - http://www.retrobike.co.uk/forum/viewto ... p;t=388839 - to allow more photos to be uploaded.

------

Renold 'The Coventry' Chain

1 1/8" Chain
102 links
(was good for me running 48t x 17t, with chain stays of approximately 435mm, measuring centre bb shell to centre drop out)

Bought NOS. Done max of around 150 dry miles. Super condition.

£23.00 (+post)
Postage will be £3.45 for 2nd Class Signed For

------

[bSOLD -- ]Bayliss Wiley 'Featherweight' Bottom Bracket Cups and Lockring with
Bayliss Wiley hollow axle - No 14 - Hollow Version
Bayliss Wiley spare axle - No 14 - Solid Version -- SOLD[/b]

BW Featherweight BB with an equally weight saving Bayliss Wiley hollow axle! No 14 model axle, according to Classic Lightweights this is for Williams and various other doubes. Also gaves a good chainline with Airlite double fixed hubs with 110mm rear spacing and a single Stronglight crankset. Also includes a spare BW No. 14 axle. Solid type.

BB ran nice and smooth for me. The cups show staining, but not any obvious pitting. The hollow axle has smooth bearing surfaces except for one mark. Shown in photo. Now that I have pulled BB I remember this. I did not seem to cause me any issue. Looks more of an indent than pitting. The spare axle is in better condition than I remember. Staining to bearing surfaces, but looks reasonably good. Solid type so a bit heavier. I'm sure from these parts an excellent, smooth bb could be set up with a bit of care. Bearings are highest grade and practically new. I've never removed a bottom bracket to find such clean grease!

Photos now added, see later reply on thread - Scroll right down!

SOLD -- PRICE: £40.00 (+post) -- SOLD

------

SOLD — Ideale Model 90 - Daniel Rebour Treatment - Saddle — SOLD
Ideale Saddle Clamp, single rail with adjustment

Superb condition saddle. Leather is great and stiff, barely feels broken in! Chrome is very good on nose and rails. Matching Ideale saddle clamp. Good condition with good engraving. These offer really nice adjustment and tilt.

SOLD — Saddle + Clamp: £80 (+post) — SOLD

------

GB Maes Bars / Velox rubber end plugs

Bars are 25.4mm clamp. Measured at drops, width is 39cm c-to-c / 41cm outside to outside.
In good condition, really nice ferrule with GB Maes engraving. Plenty scratches to bars, but hidden when taped. Few scratches to ferrule but mainly covered by stem. Detailed photo now provided, see below. Could easily carefully polish more with some v. fine wet and dry if you want.

Handlebars + End Plugs - £25.00 (+post)
Post looks approx £4 to £6 2nd Class Signed for depending if small or med parcel once packaged.

------

Wingnuts - 'oiler shape' - For front hub

Bought NOS I think, may have fitted and removed.

£7.00 (+post)

------

SOLD -- Titan Seatpost - Alloy - 27.2mm

Titan domed seatpost. Alloy, so a very nice alternative to the steel variety.

£15.00 (+post)

------

SOLD -- GB 531 Spearpoint Stem

Stem has its lovely original chrome, some patina but looks superb. Lovely engraving. And complete with proper red GB pinch bolt.

SOLD --Stem - £65.00 (+post)

------

SOLD -- Stronglight Cottered Crankset + 48T Ring

Driveside and ring rechromed. Think it is a Stronglight 'Standard' Model. Lovely elegant ring. Non-driveside is not Stronglight but a replacement Milremo arm bought NOS. Have a bunch of cotters I'll include as I'll never need, but not sure of their sizes.

SOLD -- PRICE: £35.00 (+post)

------

SOLD -- Brampton B8 Pedals / Christophe Toe Clips

Rare to find in this state. They are in amazing condition. Chrome superb. Not used in about 5 years, so maybe need some fresh grease, but they are fairly smooth. Included are some Christophe toeclips. Think these are NOS, and think that's the earlier logo? Size small.

SOLD -- PRICE: £70.00 (+post)

------

SOLD -- MAFAC 'Dural Forge' Brakeset -- SOLD PENDING PAYMENT

- With proper early front 'closed back' cable hanger
- Includes a nice headset cable hanger
- New, superior quality replica brake blocks only very lightly used
- Sadly I can't located rear seatpin bolt hanger and only have part of a tatty rear cable hanger included. Usually easily sourced.

Nice condition. Alloy nice bright, polished. Decent chrome, but some wear and tarnishing in places.

SOLD -- PRICE: £32.00 (+post) -- SOLD PAYMENT PENDING

------
 

Attachments

  • IMG_1683.webp
    IMG_1683.webp
    208.2 KB · Views: 407
  • IMG_1684.webp
    IMG_1684.webp
    109.2 KB · Views: 407
  • IMG_1655.webp
    IMG_1655.webp
    85 KB · Views: 407
  • IMG_1661.webp
    IMG_1661.webp
    53.2 KB · Views: 407
  • IMG_1666.webp
    IMG_1666.webp
    156.6 KB · Views: 407
  • IMG_1669.webp
    IMG_1669.webp
    148.3 KB · Views: 407
  • IMG_1686.webp
    IMG_1686.webp
    91.2 KB · Views: 407
  • IMG_1672.webp
    IMG_1672.webp
    51.5 KB · Views: 407
Re: 1950s: Airlite, Ideale, Brampton, Renold, GB, MAFAC, BW etc.

More photos...
 

Attachments

  • IMG_1493.webp
    IMG_1493.webp
    116.3 KB · Views: 706
  • IMG_1492.webp
    IMG_1492.webp
    105.7 KB · Views: 706
  • IMG_1489.webp
    IMG_1489.webp
    136.6 KB · Views: 408
  • IMG_1490.webp
    IMG_1490.webp
    61.8 KB · Views: 407
  • IMG_1495.webp
    IMG_1495.webp
    104.7 KB · Views: 407
  • IMG_1491.webp
    IMG_1491.webp
    35.6 KB · Views: 407
Re: 1950s: Airlite, Ideale, Brampton, Renold, GB, MAFAC, BW etc.

colnagokid":277dnwcu said:
Rotrax road/path frame??

Yep. Frame will be for sale too. Time to let it go and fund a modern build.
 
Re: 1950s: Airlite, Ideale, Brampton, Renold, GB, MAFAC, BW etc.

Set of wingnuts added.
Crankset and Pedals sold.
Prices for saddle / post / clamp if sold separately added.
 
Bottom Bracket description updated.

BB now removed from frame. Turns out axle in bottom bracket was not Gnutti and is actually a matching hollow Bayliss Wiley No 14 model. So a more complete matching set than I remembered.

Photos below of all parts... Bayliss Wiley Featherweight bottom bracket cups, locking, hollow axle and solid spare axle.
 

Attachments

  • IMG_1613.webp
    IMG_1613.webp
    139.3 KB · Views: 482
  • IMG_1618.webp
    IMG_1618.webp
    110.4 KB · Views: 481
  • IMG_1619.webp
    IMG_1619.webp
    132.1 KB · Views: 480
  • IMG_1620.webp
    IMG_1620.webp
    95.5 KB · Views: 480
  • IMG_1621.webp
    IMG_1621.webp
    136.4 KB · Views: 480
  • IMG_1625.webp
    IMG_1625.webp
    39 KB · Views: 481
  • IMG_1627.webp
    IMG_1627.webp
    97.6 KB · Views: 481
  • IMG_1617.webp
    IMG_1617.webp
    102.8 KB · Views: 481
Spare axle inc. with bottom bracket...
 

Attachments

  • IMG_1628.webp
    IMG_1628.webp
    109 KB · Views: 479
  • IMG_1629.webp
    IMG_1629.webp
    139.6 KB · Views: 479
  • IMG_1630.webp
    IMG_1630.webp
    126.2 KB · Views: 479
  • IMG_1631.webp
    IMG_1631.webp
    115.9 KB · Views: 479
  • IMG_1634.webp
    IMG_1634.webp
    22.7 KB · Views: 479
  • IMG_1635.webp
    IMG_1635.webp
    23.6 KB · Views: 479
Back
Top