Reductions - Ideale, Renold, GB, Bayliss Wiley, MAFAC

Cheesedisease

Senior Retro Guru
Airlite Track Hubs / Dunlop Stainless Rims / Panaracer Tyres / Villier Cog + Extras

Bit lost amongst all these parts so moved to here - http://www.retrobike.co.uk/forum/viewto ... p;t=388839 - to allow more photos to be uploaded.

------

Renold 'The Coventry' Chain

1 1/8" Chain
102 links
(was good for me running 48t x 17t, with chain stays of approximately 435mm, measuring centre bb shell to centre drop out)

Bought NOS. Done max of around 150 dry miles. Super condition.

£23.00 (+post)
Postage will be £3.45 for 2nd Class Signed For

------

[bSOLD -- ]Bayliss Wiley 'Featherweight' Bottom Bracket Cups and Lockring with
Bayliss Wiley hollow axle - No 14 - Hollow Version
Bayliss Wiley spare axle - No 14 - Solid Version -- SOLD[/b]

BW Featherweight BB with an equally weight saving Bayliss Wiley hollow axle! No 14 model axle, according to Classic Lightweights this is for Williams and various other doubes. Also gaves a good chainline with Airlite double fixed hubs with 110mm rear spacing and a single Stronglight crankset. Also includes a spare BW No. 14 axle. Solid type.

BB ran nice and smooth for me. The cups show staining, but not any obvious pitting. The hollow axle has smooth bearing surfaces except for one mark. Shown in photo. Now that I have pulled BB I remember this. I did not seem to cause me any issue. Looks more of an indent than pitting. The spare axle is in better condition than I remember. Staining to bearing surfaces, but looks reasonably good. Solid type so a bit heavier. I'm sure from these parts an excellent, smooth bb could be set up with a bit of care. Bearings are highest grade and practically new. I've never removed a bottom bracket to find such clean grease!

Photos now added, see later reply on thread - Scroll right down!

SOLD -- PRICE: £40.00 (+post) -- SOLD

------

SOLD — Ideale Model 90 - Daniel Rebour Treatment - Saddle — SOLD
Ideale Saddle Clamp, single rail with adjustment

Superb condition saddle. Leather is great and stiff, barely feels broken in! Chrome is very good on nose and rails. Matching Ideale saddle clamp. Good condition with good engraving. These offer really nice adjustment and tilt.

SOLD — Saddle + Clamp: £80 (+post) — SOLD

------

GB Maes Bars / Velox rubber end plugs

Bars are 25.4mm clamp. Measured at drops, width is 39cm c-to-c / 41cm outside to outside.
In good condition, really nice ferrule with GB Maes engraving. Plenty scratches to bars, but hidden when taped. Few scratches to ferrule but mainly covered by stem. Detailed photo now provided, see below. Could easily carefully polish more with some v. fine wet and dry if you want.

Handlebars + End Plugs - £25.00 (+post)
Post looks approx £4 to £6 2nd Class Signed for depending if small or med parcel once packaged.

------

Wingnuts - 'oiler shape' - For front hub

Bought NOS I think, may have fitted and removed.

£7.00 (+post)

------

SOLD -- Titan Seatpost - Alloy - 27.2mm

Titan domed seatpost. Alloy, so a very nice alternative to the steel variety.

£15.00 (+post)

------

SOLD -- GB 531 Spearpoint Stem

Stem has its lovely original chrome, some patina but looks superb. Lovely engraving. And complete with proper red GB pinch bolt.

SOLD --Stem - £65.00 (+post)

------

SOLD -- Stronglight Cottered Crankset + 48T Ring

Driveside and ring rechromed. Think it is a Stronglight 'Standard' Model. Lovely elegant ring. Non-driveside is not Stronglight but a replacement Milremo arm bought NOS. Have a bunch of cotters I'll include as I'll never need, but not sure of their sizes.

SOLD -- PRICE: £35.00 (+post)

------

SOLD -- Brampton B8 Pedals / Christophe Toe Clips

Rare to find in this state. They are in amazing condition. Chrome superb. Not used in about 5 years, so maybe need some fresh grease, but they are fairly smooth. Included are some Christophe toeclips. Think these are NOS, and think that's the earlier logo? Size small.

SOLD -- PRICE: £70.00 (+post)

------

SOLD -- MAFAC 'Dural Forge' Brakeset -- SOLD PENDING PAYMENT

- With proper early front 'closed back' cable hanger
- Includes a nice headset cable hanger
- New, superior quality replica brake blocks only very lightly used
- Sadly I can't located rear seatpin bolt hanger and only have part of a tatty rear cable hanger included. Usually easily sourced.

Nice condition. Alloy nice bright, polished. Decent chrome, but some wear and tarnishing in places.

SOLD -- PRICE: £32.00 (+post) -- SOLD PAYMENT PENDING

------
 

Attachments

  • IMG_1683.jpeg
    IMG_1683.jpeg
    245.2 KB · Views: 407
  • IMG_1684.jpeg
    IMG_1684.jpeg
    164.6 KB · Views: 407
  • IMG_1655.jpeg
    IMG_1655.jpeg
    140.9 KB · Views: 407
  • IMG_1661.jpeg
    IMG_1661.jpeg
    99.9 KB · Views: 407
  • IMG_1666.jpeg
    IMG_1666.jpeg
    198.1 KB · Views: 407
  • IMG_1669.jpeg
    IMG_1669.jpeg
    188.2 KB · Views: 407
  • IMG_1686.jpeg
    IMG_1686.jpeg
    143.1 KB · Views: 407
  • IMG_1672.jpeg
    IMG_1672.jpeg
    99.7 KB · Views: 407
Re: 1950s: Airlite, Ideale, Brampton, Renold, GB, MAFAC, BW etc.

More photos...
 

Attachments

  • IMG_1493.jpeg
    IMG_1493.jpeg
    178.8 KB · Views: 705
  • IMG_1492.jpeg
    IMG_1492.jpeg
    158.6 KB · Views: 705
  • IMG_1489.jpeg
    IMG_1489.jpeg
    196.7 KB · Views: 407
  • IMG_1490.jpeg
    IMG_1490.jpeg
    115.9 KB · Views: 407
  • IMG_1495.jpeg
    IMG_1495.jpeg
    160.5 KB · Views: 407
  • IMG_1491.jpeg
    IMG_1491.jpeg
    72 KB · Views: 407
Re: 1950s: Airlite, Ideale, Brampton, Renold, GB, MAFAC, BW etc.

colnagokid":277dnwcu said:
Rotrax road/path frame??

Yep. Frame will be for sale too. Time to let it go and fund a modern build.
 
Re: 1950s: Airlite, Ideale, Brampton, Renold, GB, MAFAC, BW etc.

Set of wingnuts added.
Crankset and Pedals sold.
Prices for saddle / post / clamp if sold separately added.
 
Bottom Bracket description updated.

BB now removed from frame. Turns out axle in bottom bracket was not Gnutti and is actually a matching hollow Bayliss Wiley No 14 model. So a more complete matching set than I remembered.

Photos below of all parts... Bayliss Wiley Featherweight bottom bracket cups, locking, hollow axle and solid spare axle.
 

Attachments

  • IMG_1613.jpeg
    IMG_1613.jpeg
    203.3 KB · Views: 481
  • IMG_1618.jpeg
    IMG_1618.jpeg
    170.7 KB · Views: 481
  • IMG_1619.jpeg
    IMG_1619.jpeg
    193.1 KB · Views: 480
  • IMG_1620.jpeg
    IMG_1620.jpeg
    161.1 KB · Views: 480
  • IMG_1621.jpeg
    IMG_1621.jpeg
    200.1 KB · Views: 480
  • IMG_1625.jpeg
    IMG_1625.jpeg
    86 KB · Views: 481
  • IMG_1627.jpeg
    IMG_1627.jpeg
    152.1 KB · Views: 481
  • IMG_1617.jpeg
    IMG_1617.jpeg
    162.6 KB · Views: 481
Spare axle inc. with bottom bracket...
 

Attachments

  • IMG_1628.jpeg
    IMG_1628.jpeg
    160.8 KB · Views: 479
  • IMG_1629.jpeg
    IMG_1629.jpeg
    194.4 KB · Views: 479
  • IMG_1630.jpeg
    IMG_1630.jpeg
    173.7 KB · Views: 479
  • IMG_1631.jpeg
    IMG_1631.jpeg
    165.5 KB · Views: 479
  • IMG_1634.jpeg
    IMG_1634.jpeg
    50 KB · Views: 479
  • IMG_1635.jpeg
    IMG_1635.jpeg
    57.1 KB · Views: 479

Latest posts

Back
Top