Bit of an extensive clearout this time around 
All including UK postage. Feedback required if your international as is paypal(fees paid by buyer)
Recorded post within 3 days(usually next)
More pics available on request and most important- Dib here before mailing me, or instead of rather. We really must adopt a system of fairness and dibs is mine.
Lot of stuff so ill post the pics and be ongoing with the writing of the descriptions for each item along with the price
Coffee first methinks
-------------------------------------------------------------
Might as well start at the top
Hope hoops Pro2 laced to Mavic 719 complete with 160mm Hope floating rotor in excellent condition.£60 Bargain
I relaced this from a DT swiss so it has just been built 22/12/13,
Completion and final truing carried out by Al Gow of wheelcraft
Totally straight and true, by one of the best about, built by Al you cant get better.
Orange Limited Edition F7 Forks 10th anniversary i think £40
Yellowy/orange with rear facing brake pivots,originals no disc mount.
1 1/8" 203mm S/nut fitted 395mm C-A
Alcera V's/Pads and levers
Good condition £15
Not seen much past 2 rides so pretty much as new
LX m600 original V's
Patchy condition, would polish well though £17
XTR m95 something
One set is complete the other missing a spring. Nice condition , little scratching along edge of springless one.
Basically 3+ a spares though i think it would probably still work ok :?
really excellent condition otherwise £45
XTR spd shells
£15
XTR m900 1 1/8" threaded headset £35
Lower race/bearing has suffered but is ok i suppose, logos are clean and entact
Upper lower/bearing perfect condition
Top nut is in good condition. Lower nut/race has a bit of marring from slippy spanner
Overall its very nice and perfectly usable All O-rings,plastic washer,steerer washer original
USE 25mm post with new 27.2mm shim £17
Some fading on the lower end but likely most will be hidden -DIBBED
4x NEW Shimano pedal innards One pair L&R and 2 lefts £25
No idea what pedals these for.Bought as a joblot from CRC surplus Used a pair on DX modern and dont need these others
Usually pricey for some reason:?
Zipp carbon rear hub Spares/Repairs -£20
Drive side cup is off and needs epoxied back on. Red loctight ive been told is what to use.
Project for someone giving a rather nice wheel
Shimano spd/flatties pedals M545
Really good condition, seen next to no use. Little logos removed by previous owner. Bored i would think lol
£30
NEW Shimano Saint M800 rear disc brake £50
Inc new shimano sintred pads
Unused/unfitted No hose
Controltech Flat bar oversized middle 31.8mm 605mm uncut £22
Nice condition, logos intact, control marks as per usual
Marzocchi bomber steerer. 1 1/8" 205mm total=165mm usuable £10
Starnut fitted
Shimano LX m569 :? Cranks 3 rings £20
Bit patchy scratched but perfectly usable
Shimano LX m569 cranks, outer only fitted £15
Scratched etc etc
Tapers and threads appear OK, certainly came off without problem.
Both would polish up lovely
Suntour XC Pro cranks £20- SOLD
110mm BCD Granny ring only, outer and middle sharper than ninja throwing start :shock: I cut myself on one
Tapers and all threads in good condition. Some scratches that would clean up like the LX but not too bad.
Chris King Faded purple headset 1 1/8" £40
Bearings are fine and nice and smooth with no grittiness
Some damage to the inner from bad removal method :? (hidden in frame section) some wear from cables
Overall it looks quite nice fitted and works perfectly
Shimano deerhead front mech £20
Very nice condition indeed, some minor wear to inner cage. Original 'for Alpine' still present
28.6mm bottom pull
LX STI m560 £25
Good condition, work perfectly
The lower covers are both there but one of them has cracked off the screw mount.
Screws are present as is the mount piece and someone with a steadier hand than mine could reattach the broken bit.
Other cover/screw is there and just need refitted. Not often you still have the bits
PAIR of Kore forged stems YUP PAIR £15
I for the life of me dont know what happened with kore as they were always on par with syncros(looks for somewhere to hide)
These stems are one piece forgings and are as strong as hell :?
Its sold as a set cos you always want it a little longer or a little shorter than the one youve fitted
Complete Ti-glide/frame mount for IS calipers(ie everything in the world) £70 I know im mad to sell this
Everything
All in excellent condition. Stripped for pic only -SOLD OMG its gone :cry:
Judy 1999 ?? :? '97 :? XC cartridge £40
Gold stanchions. WITH THE BOOTS :shock:
Fab condition in that ist seen no real use and been out 1/2 dozen times according to the chap i got it from.
Small frame size of 140mm 1 1/8" threaded steerer. Steerer badly cut and the thread is a little tight. I would either recommend spending time cleaning the thread of recutting it. Or of course fitting another crown/steerer as it has that option.
All including UK postage. Feedback required if your international as is paypal(fees paid by buyer)
Recorded post within 3 days(usually next)
More pics available on request and most important- Dib here before mailing me, or instead of rather. We really must adopt a system of fairness and dibs is mine.
Lot of stuff so ill post the pics and be ongoing with the writing of the descriptions for each item along with the price
Coffee first methinks
-------------------------------------------------------------
Might as well start at the top
Hope hoops Pro2 laced to Mavic 719 complete with 160mm Hope floating rotor in excellent condition.£60 Bargain
I relaced this from a DT swiss so it has just been built 22/12/13,
Completion and final truing carried out by Al Gow of wheelcraft
Totally straight and true, by one of the best about, built by Al you cant get better.
Orange Limited Edition F7 Forks 10th anniversary i think £40
Yellowy/orange with rear facing brake pivots,originals no disc mount.
1 1/8" 203mm S/nut fitted 395mm C-A
Alcera V's/Pads and levers
Good condition £15
Not seen much past 2 rides so pretty much as new
LX m600 original V's
Patchy condition, would polish well though £17
XTR m95 something
One set is complete the other missing a spring. Nice condition , little scratching along edge of springless one.
Basically 3+ a spares though i think it would probably still work ok :?
really excellent condition otherwise £45
XTR spd shells
£15
XTR m900 1 1/8" threaded headset £35
Lower race/bearing has suffered but is ok i suppose, logos are clean and entact
Upper lower/bearing perfect condition
Top nut is in good condition. Lower nut/race has a bit of marring from slippy spanner
Overall its very nice and perfectly usable All O-rings,plastic washer,steerer washer original
USE 25mm post with new 27.2mm shim £17
Some fading on the lower end but likely most will be hidden -DIBBED
4x NEW Shimano pedal innards One pair L&R and 2 lefts £25
No idea what pedals these for.Bought as a joblot from CRC surplus Used a pair on DX modern and dont need these others
Usually pricey for some reason:?
Zipp carbon rear hub Spares/Repairs -£20
Drive side cup is off and needs epoxied back on. Red loctight ive been told is what to use.
Project for someone giving a rather nice wheel
Shimano spd/flatties pedals M545
Really good condition, seen next to no use. Little logos removed by previous owner. Bored i would think lol
£30
NEW Shimano Saint M800 rear disc brake £50
Inc new shimano sintred pads
Unused/unfitted No hose
Controltech Flat bar oversized middle 31.8mm 605mm uncut £22
Nice condition, logos intact, control marks as per usual
Marzocchi bomber steerer. 1 1/8" 205mm total=165mm usuable £10
Starnut fitted
Shimano LX m569 :? Cranks 3 rings £20
Bit patchy scratched but perfectly usable
Shimano LX m569 cranks, outer only fitted £15
Scratched etc etc
Tapers and threads appear OK, certainly came off without problem.
Both would polish up lovely
Suntour XC Pro cranks £20- SOLD
110mm BCD Granny ring only, outer and middle sharper than ninja throwing start :shock: I cut myself on one
Tapers and all threads in good condition. Some scratches that would clean up like the LX but not too bad.
Chris King Faded purple headset 1 1/8" £40
Bearings are fine and nice and smooth with no grittiness
Some damage to the inner from bad removal method :? (hidden in frame section) some wear from cables
Overall it looks quite nice fitted and works perfectly
Shimano deerhead front mech £20
Very nice condition indeed, some minor wear to inner cage. Original 'for Alpine' still present
28.6mm bottom pull
LX STI m560 £25
Good condition, work perfectly
The lower covers are both there but one of them has cracked off the screw mount.
Screws are present as is the mount piece and someone with a steadier hand than mine could reattach the broken bit.
Other cover/screw is there and just need refitted. Not often you still have the bits
PAIR of Kore forged stems YUP PAIR £15
I for the life of me dont know what happened with kore as they were always on par with syncros(looks for somewhere to hide)
These stems are one piece forgings and are as strong as hell :?
Its sold as a set cos you always want it a little longer or a little shorter than the one youve fitted
Complete Ti-glide/frame mount for IS calipers(ie everything in the world) £70 I know im mad to sell this
Everything
All in excellent condition. Stripped for pic only -SOLD OMG its gone :cry:
Judy 1999 ?? :? '97 :? XC cartridge £40
Gold stanchions. WITH THE BOOTS :shock:
Fab condition in that ist seen no real use and been out 1/2 dozen times according to the chap i got it from.
Small frame size of 140mm 1 1/8" threaded steerer. Steerer badly cut and the thread is a little tight. I would either recommend spending time cleaning the thread of recutting it. Or of course fitting another crown/steerer as it has that option.
