Steerer Tube Swap Shop - shorter for longer! NO SALES!

I'd like to swap my NOS Klein MC1 Uni-Klein fork (Moonrise, compatible with 20" MC1 Klein Medium Attitude or Adroit frames) for a Uni-Klein fork in Gator Linear Fade in similar condition that's compatible with a 19" Attitude MC1 frame. Might be a longshot but I've seen some pics of fork collections and I'm hopeful that someone's up for trading. This is for a new project. A couple of pics of the fork I'm offering to swap are here:
http://www.retrobike.co.uk/forum/viewto ... 9&start=60

Please PM or email me if you have something to swap. Thanks.
 
I have a Pace 1 1/8 alloy unthreaded steerer 175mm long.

Would like a Pace 1 1/8 unthreaded steerer (alloy or steel) 250mm long.
 
dlr":2n87y65t said:
I need a 1" threaded steerer for some Pace RC36 MXCD's, 155mm ish exposed length

I have in exchange/etc a 1 1/8" unthreaded steerer for the same forks, 195mm exposed length

I have a 1 1/8 threaded RC35 steerer, approx 170mm exposed length (still on the bike). Would be interested in a swap.
 
I have a 1 1/4" Manitou 2 threaded steerer at approx 170mm and would like a 1" steerer of approx 200mm long.....................anyone ?
 
Pace rc 35

Hey

i have a Pace rc 35 1 1/4 threaded steerer and crown ring. 145mm long when fitted in forks

looking to swap for 1 1/8 threaded 143mm with crown ring

peace

martin
 
1 1/4" threaded Mag 21 or Futureshock crown/steerer req

Hi All,

I need a 1 1/4" x 6.5" or 165mm threaded Mag 20/21 crown/steerer. I have a heap of 1" threaded, 1 1/8" threaded & 1 1/8" threadless Mag 20/21 assemblies to swap.

I'd also be interested in a 1 1/4" x 6.5" or 165mm threaded Specialized Futureshock crown/steerer. I have a 1" and a 1 1/8" threaded to swap.

I can get measurements for the above easily if you have what I need.

Cheers. :)
 
Hi,
I have a 185mm total, 159mm exposed, 1" threaded steerer for Bontragers Switchblade type clamp forks.

Want the same, about 20mm shorter, (or longer and unthreaded?)

Ta
 
I have here two alloy Z2 steerers, one 213mm showing (i.e., 238mm total) and the other 209/234mm. They are both from bolt-in crowns.

I only need c190mm for the bikes they are intended for, so I could easily cut them down, but it seems a waste, so I thought I'd post on here to see if anybody has a 190 and would like to swap for a longer one.

If you have a 190 but it is bonded into the crown, we would have to swap the entire crown/steerer assembly.
 
I have a 1 1/4" Pace RC-35 steel steerer tube and crown. Steerer 170mm total so probable 125-130mm exposed. Approx 45mm threaded.

Don't need a swap, just stick a tenner in the charity box of your choice.
 
6.5x55":28sygzv7 said:
I have a 1 1/4" Pace RC-35 steel steerer tube and crown. Steerer 170mm total so probable 125-130mm exposed. Approx 45mm threaded.

Don't need a swap, just stick a tenner in the charity box of your choice.

Would this crown suit RC30 legs?
 

Latest posts

Back
Top