Square taper, grease or not!!!!

Charlieboy28":d7xxuydv said:
Can we compromise and say its a semi interference fit. As cranks don't come off when you undo the bolt. We also swap out the steel bolts to an ally bolts. If it really is a matter of how far the crank slips down the taper. Are we not saying the same thing. More grease less torque. No grease more torque to achieve the same result.

Slight amendment :)
It will come off if you remove the bolt ,it will come off in use.

Take and leave the bolt out and what happens? correct :) the crank falls off one day while cycling along.
 
Based on FCs sound contribution, here's the latest update from the experts at Parktool http://www.youtube.com/watch?v=QEz997KrbkQ

:LOL:

EDIT: Here is what Parktool actual says for the record:
"Aluminum cranks typically do not require lubrication of this press fit. Aluminum by its nature is self-lubricating as it is covered with a thin layer of oxidation. Adequate torque is typically enough to keep arms from creaking."

So pro No Grease they are, and pro lubrication from the thin layer of oxidation, and don't completely rule out Grease either.
 
Woz":1tchpnrz said:
Based on FCs sound contribution, here's the latest update from the experts at Parktool http://www.youtube.com/watch?v=QEz997KrbkQ

:LOL:

EDIT: Here is what Parktool actual says for the record:
"Aluminum cranks typically do not require lubrication of this press fit. Aluminum by its nature is self-lubricating as it is covered with a thin layer of oxidation. Adequate torque is typically enough to keep arms from creaking."

So pro No Grease they are, and pro lubrication from the thin layer of oxidation, and don't completely rule out Grease either.

Ah yes, but the grease helps prevent the oxidization which seizes the cranks onto the taper in the first place... ;)
 
We_are_Stevo":30ln0xod said:
Woz":30ln0xod said:
Based on FCs sound contribution, here's the latest update from the experts at Parktool http://www.youtube.com/watch?v=QEz997KrbkQ

:LOL:

EDIT: Here is what Parktool actual says for the record:
"Aluminum cranks typically do not require lubrication of this press fit. Aluminum by its nature is self-lubricating as it is covered with a thin layer of oxidation. Adequate torque is typically enough to keep arms from creaking."

So pro No Grease they are, and pro lubrication from the thin layer of oxidation, and don't completely rule out Grease either.

Ah yes, but the grease helps prevent the oxidization which seizes the cranks onto the taper in the first place... ;)


The non grease brigade will next be telling us that we dont have to grease our seatposts if its an alloy to steel fit.

Yeah right :LOL:
 
dyna-ti":2h9xnamd said:
We_are_Stevo":2h9xnamd said:
Woz":2h9xnamd said:
Based on FCs sound contribution, here's the latest update from the experts at Parktool http://www.youtube.com/watch?v=QEz997KrbkQ

:LOL:

EDIT: Here is what Parktool actual says for the record:
"Aluminum cranks typically do not require lubrication of this press fit. Aluminum by its nature is self-lubricating as it is covered with a thin layer of oxidation. Adequate torque is typically enough to keep arms from creaking."

So pro No Grease they are, and pro lubrication from the thin layer of oxidation, and don't completely rule out Grease either.

Ah yes, but the grease helps prevent the oxidization which seizes the cranks onto the taper in the first place... ;)


The non grease brigade will next be telling us that we dont have to grease our seatposts if its an alloy to steel fit.

Yeah right :LOL:

That's because assembly/disassembly seem to have seem to have become a little interposed early on...

...we ALL know you don't need grease to facilitate assembly, just as we all know how many repeat 'How do I remove my stuck ***********' threads there are :cool:
 
I'm starting to believe that a lot more people here than I previously thought don't understand the difference between a square taper interface, a seatpost, and a quill stem(sing it with me now, "one of these things is not like the other things..")

The good news is this confusion probably won't end up with them hurting themselves, but sadly the mechanical ignorance will continue to be spread

Shameful
 
Back
Top