bikenut2010
Senior Retro Guru
600 AX aero post...can't get a Rolls saddle level, ends up a couple of mm nose down; I've reversed clamp and wound out adjuster...is this a combo problem anyone else is aware of? Rolls on a campy aero post is fine.
great i'll give it a try...!lewisfoto":3b5oty7g said:you could try setting the saddle a few degrees high and see if it levels when the bolt is tightened?
I took a look at my own 600 ax post and it seems that if you tighten the main bolt until it is snug, with the nose up a tad, then tighten the adjustment bolt to put it on level, and finally give the main bolt the quarter to half turn to be fully tight.