riser bar on answer a tac

[dapanico]

re

But why to use this beautiful and old stem for a rise bar ?
If you really want a rise bar, take another stem.
If you really want the ATAC, take a answer taperlite :roll:

I need a riser bar
I need a 1-1/4" stem for my cannanodale

give me the solution

 

[lesta]

Can be done, simply thread the bolts in from the back against a coin to open the stem just enough to give you the extra space.

 

[scant]

thats ameybrooks kona pictured above. PM him & ask. personally I wouldnt overstress alu stem clamps, steel would be different. answer made an atac DH stem which looks similiar at the back of the stem, but with a removeable faceplate for easy fitting of riser bars.. maybe thats your answer?

 

[monsterfatuk]

Re: re

But why to use this beautiful and old stem for a rise bar ?
If you really want a rise bar, take another stem.
If you really want the ATAC, take a answer taperlite :roll:

I need a riser bar
I need a 1-1/4" stem for my cannanodale

give me the solution

higher the stem to the same height as your risers rise,then find a bar the same width

 

[dapanico]

Re: re

higher the stem to the same height as your risers rise,then find a bar the same width

I DONT WANNA USE FLAT BAR :x

 

[dapanico]

Done it and undone it a few times.

Tips

4. Not oversize bars like those Deity's (doh).

...

this deity is not an oversized bar ..

http://images.google.it/imgres?imgu...&tbnw=116&prev=/images?q=deity+bar&um=1&hl=it

 

[FluffyChicken]

Done it and undone it a few times.

Tips

4. Not oversize bars like those Deity's (doh).

...

this deity is not an oversized bar ..

http://images.google.it/imgres?imgu...&tbnw=116&prev=/images?q=deity+bar&um=1&hl=it

There is the option for the standard one, but the one you pictured and the picture there is the oversized one :roll:

You'll either need to buy and hope, or just look for a stem (or shim system) that will the the job you want properly.

Plenty of 1-1/4" stems here may be thinner in the clamp http://www.sjscycles.co.uk/category-Ste ... ed-580.htm

Shim http://www.sjscycles.co.uk/product-Thor ... ks-444.htm
though you may have a similar problem with 1", so look for a 1-1/8 to 1-1/4" shim.

Ahead converter
http://www.sjscycles.co.uk/product-Unbr ... r-3063.htm
but find one for 1-1/4"
and buy a new style stem easier.



I guess you must use the riser just for look then ?

 

[24pouces]

Re: re

I need a 1-1/4" stem for my cannanodale

give me the solution

So, use a 1" or 1"1,8 stem wit a shim…

 

[dapanico]

Shim http://www.sjscycles.co.uk/product-Thor ... ks-444.htm
though you may have a similar problem with 1", so look for a 1-1/8 to 1-1/4" shim....

I guess you must use the riser just for look then ?

thanks!
i was looking for a "stem adapter" in 1 1/4" but i don't have found anything online IN THIS SIZE, infact i need a "shim" !!! and use (more easy to find ) a traditional 1.1/8 stem adapter

Yes, i prefer use riser bar both for look and for whellies (more simple for me)

Finally

CANNONDALE M800

+

1-1/4" PEPPERONI THREADED FORK

+

1-1/4" XTR THREADED HEADSET

+

SHIM

+

1-1/8" STEM ADAPTER like this PROFILE ONE

+

1-1/8" 110GR (WOW!) Smica Pro Oversize Black Alloy Stem - 31.8mm Clamp

AND...

oversized DEITY RISER BAR

I LOVE YOU ALL

BUT....

only a moment....

maybe.....

there is anothe more simple solution

YES



















RINGLE ZOOKA 1 1/4

ANYONE HAVE GOT ONE TO SELL?

 

[FluffyChicken]

OR buy a new frame & forks