Rigid fork and Mavic citron wheelset

Madmax1993

Orange 🍊 Fan
Feedback
View
Here are some bits I should really clear out to free up space and funds. I haven't taken pictures of anything yet, but can do so as soon as there is interest in particular items.

Unbranded 700c fork, with removable v-brake bosses and IS brake mount on the front of the right fork leg. Has mudguard eyelets and a very long steerer of 245mm. Unsure of axle-crown, axle to crown of 400mm with clearance of 365mm from axle to the bottom of the crown. £30 posted due to length of parcel. PayPal F&F

Mavic x317 Citron wheelset, on Shimano FH-M525a rear hub and HB-M475 front hub (hubs and spokes brand new, rims used but in great condition) £80

Marzocchi early Z1 v-brake bosses
These have a 6mm thread, but finer pitch than M6. I can't remember what they came off, but they've been in my parts stash for a long time, so there's no point holding onto them. Pics on request £7 posted

'Zitto' (eBay special) 10 SPD cassette 11-42t, approx 600g. I thought it might be worth a try, but I found the shifting to be pretty vague in the higher gears, and having straightened my hanger and tried new cables, I have concluded that the cassette is a bit shit. It might be of use to someone though, in a pinch. £10 (will need to check postage cost)

SDG I-beam jump saddle and 25.4mm seatpost. Good condition. Pics on request £15 posted

'Redland' cable actuated hydraulic disk callipers (pair). Good condition, cable pinch bolt on the actuator arms don't give much surface to clamp cables, so a bit if a faff to set up, and could probably do with new pads f+r. £20 posted

Shimano Tiagra ST-4501 left hand double STI shifter £25


***Sold***

Mavic Crossride grey/silver wheelset, both disk and rim brake compatible £70
Marzocchi Dirt Jump 3 fork, 1 1/8" steerer (190mm long), IS brake mounts and 100mm air sprung travel £25
SLX 10 speed i-spec-B shifter £25
Magura HS33 front brake £30
Kona front crate/basket £25
 

Attachments

  • IMG_1507470832992_40898.jpg
    IMG_1507470832992_40898.jpg
    68.4 KB · Views: 1,180
  • IMG_15022019_143747_(1200_x_365_pixel).jpg
    IMG_15022019_143747_(1200_x_365_pixel).jpg
    27.4 KB · Views: 892
  • IMG_15022019_143851_(700_x_1193_pixel).jpg
    IMG_15022019_143851_(700_x_1193_pixel).jpg
    48.8 KB · Views: 892
  • IMG_15022019_143913_(1200_x_675_pixel).jpg
    IMG_15022019_143913_(1200_x_675_pixel).jpg
    49.1 KB · Views: 892
  • IMG_15022019_143926_(1200_x_675_pixel).jpg
    IMG_15022019_143926_(1200_x_675_pixel).jpg
    46.4 KB · Views: 892
  • IMG_15022019_144800_(950_x_1216_pixel).jpg
    IMG_15022019_144800_(950_x_1216_pixel).jpg
    92.5 KB · Views: 884
  • IMG_15022019_144740_(1100_x_1140_pixel).jpg
    IMG_15022019_144740_(1100_x_1140_pixel).jpg
    88.9 KB · Views: 884
  • IMG_15022019_144717_(950_x_1180_pixel).jpg
    IMG_15022019_144717_(950_x_1180_pixel).jpg
    66.4 KB · Views: 884
Re:

Hi
What is the axle-to-crown length of the forks? And do you know the apx weight?
Thanks
 
Re: Re:

baj":2cnn9z8p said:
Hi
What is the axle-to-crown length of the forks? And do you know the apx weight?
Thanks

Sorry for the delay in replying.
I'll try and get down to my storage unit to measure the axle-crown and pop the fork on the scales. They are slightly longer than a genesis croix de fer fork if that helps, as this had a fair bit of clearance between the tyre and fork, whereas when I fitted the cdf fork, there was only a bawhair of clearance.
 
Back
Top