Sold REDUCED...1995 Pace RC35 MXCD Forks fully rebuilt

Tootyred

Old School Grand Master
Feedback
View
Pair of Pace RC35 MXCD forks. Fully rebuilt....but ive been offered a different option altogether, so decided to let them go as part of a radical rethink of my next project.

60mm travel, approx 415mm a to c, 1 1/8" ahead steerer fitted thats 215mm long from the base of the crown race.....of course you can always swap it out for a different size or threaded if you need to.

Complete rebuild..see photos, including polishing! Mix of new and lightly used elastomers went back in to replace the crumbling goo! Will supply the spare new ones and a bag of usable old ones with the forks, so you can set them up how you like.

Built following Paces guidelines, so set for me at about 13 stone at present, but can be easily adjusted with supplied bits if need be. Set up for front facing cantilever, but can obviously be turned round if you need to simply enough.

Stantions etc good condition imo....there is a slight mark on the fork leg, but i can hardly pick it up with the camera , and a mark from the brake pivot on the brace.

Asking £105 posted, uk only, paypal friends and family please.

REDUCED.....NOW JUST £90 posted.

Any questions ask.
 

Attachments

  • 20211027_111545.jpg
    20211027_111545.jpg
    435.2 KB · Views: 120
  • 20211027_174322.jpg
    20211027_174322.jpg
    362.9 KB · Views: 100
  • 20211027_174034.jpg
    20211027_174034.jpg
    383.6 KB · Views: 71
  • 20211027_174026.jpg
    20211027_174026.jpg
    391.1 KB · Views: 70
  • 20211027_174040.jpg
    20211027_174040.jpg
    357.8 KB · Views: 77
  • 20211027_173959.jpg
    20211027_173959.jpg
    355.5 KB · Views: 88
  • 20211027_173930.jpg
    20211027_173930.jpg
    369.6 KB · Views: 86
  • 20211027_174449.jpg
    20211027_174449.jpg
    313.9 KB · Views: 88
  • 20211027_174015.jpg
    20211027_174015.jpg
    393.6 KB · Views: 90
  • 20211027_174004.jpg
    20211027_174004.jpg
    369.3 KB · Views: 105
Last edited:
Oh....bit of decal loss, could be replaced or just rubbed off, but they do show them as MXCD
 
Nice rebuild, great work.

Out of curiosity: What steerer specifications are required in case one would need to swap? Is there anything „Pace“ specific?

Regards,
Thomas
 
Basically they are just a 28.6mm tube with a circlip groove. Im no expert, but i belive people have used RST steers in the past.

However, pace sell them off the shelf still in 1" and 1 1/8", both threaded and ahead.

There is a steer swap page on retrobike too.
 
Got to ask....don't get if you don't ask. Pm sent as it you with a slight counter offer.
 

Attachments

  • 16356971046456334381911210645139.jpg
    16356971046456334381911210645139.jpg
    313.3 KB · Views: 3

Latest posts

Back
Top