Wold Ranger
Old School Grand Master
- Feedback
- View
Well I think it's nice anyway, Swapped this with Passiflora, (many thanks Nick))was originally decaled with Euro-TBG decals and painted Black.
Some of you may have seen this frame up for sale for some time in the FS on here, but never even had a sniff of interest :? :? I felt it was an inch too big for me, but having ridden it with the shorter stem and in line post think it will be fine!
Tange Prestige Concept tubeset (Same as a Teasdale Hot, but welded up in Taiwan) Bare frame weighes 4.18 Pounds in this 18 inch version.
The frame had no dings or rust, but about 30-40 percent of the paint had chipped off, so had it two pack powdered (both Paint and Powder over each other) The primer etching paint coat is in white and gives a brilliance to the finish through the Green which is matched to Kona Apple green of that period.
I was shocked when I rode and then weighed it, it just flies, even though the wheelset isn't the lightest at 1750g, but they won't break or buckle!
All up weight is just 21.9 pounds and I haven't even tried much! The P2's are the 39.5cm atc Triple butted and weigh just 695g
Thanks to Gil for the Decals (have them for Fork and stem, but prefer the uncluttered look?
Ok The 8 Speed 12-26 roadie block is sub 200g and Gripshift and Rockwerks brake levers are both light, but the bars are Merlin Ti and weigh a disappointing 170g
saddle is a prologo leather at 260g.
Mechs are M900
Brakes M900
Tyres IRC Mythos skinwall 1.95K
Tubes Schwalbe Race Nitril (70g )
Stem Velocity 100mm
Wheels DT swiss on Mavic Ceramics Sapim spokes
Skewers Odyssey Sveldt
Pedals (cheapo cage but light)
BB UN72 122.5mm
Cranks L & M stardrive 170mm (these are damned light sub 500g with ally bolts and all rings)
Headset Modus (looking for a control centre_
Rings Outers FSA MD Granny Tune Titanium 22t
Bottle cage bolts Spin Ti
Canti Bolts Ducati Disc brake studs
Some of you may have seen this frame up for sale for some time in the FS on here, but never even had a sniff of interest :? :? I felt it was an inch too big for me, but having ridden it with the shorter stem and in line post think it will be fine!
Tange Prestige Concept tubeset (Same as a Teasdale Hot, but welded up in Taiwan) Bare frame weighes 4.18 Pounds in this 18 inch version.
The frame had no dings or rust, but about 30-40 percent of the paint had chipped off, so had it two pack powdered (both Paint and Powder over each other) The primer etching paint coat is in white and gives a brilliance to the finish through the Green which is matched to Kona Apple green of that period.
I was shocked when I rode and then weighed it, it just flies, even though the wheelset isn't the lightest at 1750g, but they won't break or buckle!
All up weight is just 21.9 pounds and I haven't even tried much! The P2's are the 39.5cm atc Triple butted and weigh just 695g
Thanks to Gil for the Decals (have them for Fork and stem, but prefer the uncluttered look?
Ok The 8 Speed 12-26 roadie block is sub 200g and Gripshift and Rockwerks brake levers are both light, but the bars are Merlin Ti and weigh a disappointing 170g
saddle is a prologo leather at 260g.
Mechs are M900
Brakes M900
Tyres IRC Mythos skinwall 1.95K
Tubes Schwalbe Race Nitril (70g )
Stem Velocity 100mm
Wheels DT swiss on Mavic Ceramics Sapim spokes
Skewers Odyssey Sveldt
Pedals (cheapo cage but light)
BB UN72 122.5mm
Cranks L & M stardrive 170mm (these are damned light sub 500g with ally bolts and all rings)
Headset Modus (looking for a control centre_
Rings Outers FSA MD Granny Tune Titanium 22t
Bottle cage bolts Spin Ti
Canti Bolts Ducati Disc brake studs