Manitou Mars carbon fork overhaul

[AJW207]

Evening
I have a help request for the good people of this forum.
I am looking to get my 2001 Manitou Mars carbon forks overhauled as there is oil dripping from one fork leg now. These were original spec for the bike, so really want to keep these in some sort of running condition, but not for any sort of heavy use. I have explored a few companies but drawn a blank to this point. Really hoping for some advice as to where I could send them? Many thanks in advance.

 

[rc300]

Pretty simple in there

Manitou 2001 MARS Service Manual (Page 7 of 14) | ManualsLib

www.manualslib.com

 

[AJW207]

Many thanks for that. Had a look briefly at the other relevant posts- are spares available if I do take the forks apart? Apologies if this has been covered and I have missed it.
Thanks again.

 

[rc300]

Many thanks for that. Had a look briefly at the other relevant posts- are spares available if I do take the forks apart? Apologies if this has been covered and I have missed it.
Thanks again.

Can still get plenty of 28.6 wiper seals and generally any o rings in there are readily available and not fork specific. Just be careful with brittle plastic bits!