Mag21 crown or complete fork, threaded, 1.1/8", 160mm long
- Thread starter troje
- Start date
- Feedback
- View
Re: Mag21 crown threaded, 1.1/8", 160mm long
Ooo it's got shorter. Still don't think I have anything at 160
Headtube 125mm then ?
Ooo it's got shorter. Still don't think I have anything at 160
Headtube 125mm then ?
Re: Mag21 crown threaded, 1.1/8", 160mm long
Hi FC, it's a 127.5mm headtube and I found a very low profile headset, a Tioga Avenger CR set with a stack height of 31.5. Together that requires a minimum of 159mm tube. But apparently Mag crowns in that size mysteriously disappeared from this planet...
Hi FC, it's a 127.5mm headtube and I found a very low profile headset, a Tioga Avenger CR set with a stack height of 31.5. Together that requires a minimum of 159mm tube. But apparently Mag crowns in that size mysteriously disappeared from this planet...
- Feedback
- View
Re: Mag21 crown threaded, 1.1/8", 160mm long
If they are not 140 or 145 it's bloody annoying.
A friend needed shorter than that and it was actually shorter than the normal 'threaded to' part on a mag steerer. Ended up with a MAG20 style one.
All longer ones are hard to find either threaded or threadless.
Longer will chop down of course.
140/170/etc in 30mm increments where the standard length. But most I seem to end up with are chopped to 145mm.
I do keep an eye out.
If they are not 140 or 145 it's bloody annoying.
A friend needed shorter than that and it was actually shorter than the normal 'threaded to' part on a mag steerer. Ended up with a MAG20 style one.
All longer ones are hard to find either threaded or threadless.
Longer will chop down of course.
140/170/etc in 30mm increments where the standard length. But most I seem to end up with are chopped to 145mm.
I do keep an eye out.
