In a bid to get one of my older bikes usable again, im looking for a long, tall, high, 1" steerer quill stem.
Silver, smooth......for an early 80s bike.
Somthing like this.....but with around 120 to 150 mm of reach (angle dependant)......I know its an ask, but its worth a try, before another bike goes up for sale, due to my increasingly dodgy back.
Ive looked at the nitto mt10 below, but sadly the reach is far too short at its 35o angle. To give some idea at 35o i would need about 150mm of reach and a min quill length of about 140mm.
If it was 25o, i could probably get away with 120mm, but would need min 160mm to get them up high enough.
Cheers guys.
Silver, smooth......for an early 80s bike.
Somthing like this.....but with around 120 to 150 mm of reach (angle dependant)......I know its an ask, but its worth a try, before another bike goes up for sale, due to my increasingly dodgy back.
Ive looked at the nitto mt10 below, but sadly the reach is far too short at its 35o angle. To give some idea at 35o i would need about 150mm of reach and a min quill length of about 140mm.
If it was 25o, i could probably get away with 120mm, but would need min 160mm to get them up high enough.
Cheers guys.
Last edited:
