YourroyalHEINniss
Retro Guru
Hi there,Re: Shabby 1991 Haro Extreme Comp
...And it's done! Well...mostly. The front shifter failed catastrophically first ride - seems the attachment bolt was glued in! - and the elastomers are getting shorter every time the fork compresses; those are easily fixed. Everything else works, which is a miracle given a lot of it is original to the bike - including the cables! - and has survived 27 very rough years including being stolen and recovered, left in the elements, stripped and rebuilt.
I found a Manitou 1 near the end of the build so I subbed that in, with the Manitou 2 crown for now until I find a 1-1/8" threaded Manitou 1 crown with a very short steerer.
Build ended up as follows:
Frame: 1991 Haro Extreme Comp 4130
Fork: Answer Manitou 1
Headset: Tioga Avenger OS 1-1/8"
Stem: Haro USA Wing Strut 135mm, 31.8 clamp
Handlebar: Haro USA Wing Bar (powerbend style) 31.8 dia
Grips: Answer Aggressor
Brakes: XT M734/M733
Brake Pads: Unknown, old.
Brake Cables: 2.5mm brake cables
Cantilever cable hangers: Shimano
Shift/brake Levers: ST-M090
Front Derailleur: XT M73x
Rear Derailleur: XT M73x
Derailleur Cables: Mix of original and leftovers
Cassette: HG50
Chain: HG50
Cranks: Topline
Crank Bolts: parts box
Chainrings: Shimano SG
Bottom Bracket: Unknown
Pedals: VP
Hub Skewers: Cheap 90s purple tat
Rims: Ambrosio rear, Ritchey Vantage front
Hubs: XT M730
Nipples: Rusty and crusty
Spokes: Dull
Tyres: Smoke classic 2.1/Dart SC 2.2 black
Saddle: Vetta loungechair style number
Seatpost: Kalloy probably
Seatpost Binder: Cheap 90s purple tat
1991 Haro Extreme Comp finished by floody31, on Flickr
1991 Haro Extreme Comp finished by floody31, on Flickr
Post from long ago but ... Who knows?
I have this 21,5 inch Haro Extreme frameset hanging (upside down for future Caustic Soda treatment) but I'm not quite sure about the new seatpost's diameter. Current one is frozen, mingled, ruined, deformed.
Cannot seem to find any online info, can you be of any assistance?
Thanks in advance.
Hein