Wanted 1981 Components wanted

[Dangermouse]

Looking for Shimano 600 or Campag for a 1981 Ti Raleigh restoration

 

[bhill22]

1981 600 is there an overlap? , 1st gen, 600 ax, 600ex ? - I have some bits 600 groupset which one not confident in

 

[pigman]

I have 600 brake calipers. Bolts are Allen key length, but no fixing bolts supplied. Also no blocks or shoes. Metal work and adjuster rubbers are in good order. Short race depth
£10

I also have a 7200 duraAce bottom bracket. Races and surfaces are in good order. The original plastic water shield is also in good order. The original bearings in cages are lost, but I'll supply new loose ball bearings. I used this for a double DA7200 chainset, axle is marked 68/112
Again £10

Above +£3 postage one or both items

 

[Guinessisgoodforyou]

I'll have the b/b if Dangermouse doesn't want it.

 

[Dangermouse]

If the BB is British thread I will take it, sorry Guiness

 

[Guinessisgoodforyou]

If the BB is British thread I will take it, sorry Guiness

No worries mate

 

[pigman]

If by chance the sale falls through, you're next in line guiness

 

[Guinessisgoodforyou]

If by chance the sale falls through, you're next in line guiness

Thanks

 

[Spankyfart]

I have a good few Dura Ace 7200 EX bits, cranks, calipers, 1" headset, the pedals and the front derailleur.
Can't find the rear derailleur but it should be somewhere in a box, let me know if you are interested.

VeloBase.com - Component Listing

 

[Tel]

I have 600 brake calipers. Bolts are Allen key length, but no fixing bolts supplied. Also no blocks or shoes. Metal work and adjuster rubbers are in good order. Short race depth
£10

I also have a 7200 duraAce bottom bracket. Races and surfaces are in good order. The original plastic water shield is also in good order. The original bearings in cages are lost, but I'll supply new loose ball bearings. I used this for a double DA7200 chainset, axle is marked 68/112
Again £10

Above +£3 postage one or both items

Could I have the 600 calipers please?