The one and only "HOW MUCH IS MY xyz WORTH" thread

Status
Not open for further replies.
ya think?

cchris2lou":ox4943mg said:
I am sure you would get not far from £1000 for this one .

In parts would it fetch more than that?

What value would you put on the frameset? With Yo forks & early King H-set!
 
I am thinking value of the parts .

I cant see anybody wanting to buy this bike to keep it like that . not that is is not nice , but it is a finished product , not a project .

Frame , around £400 to £500 I would think . it is nice but not original .
 
Cool!

Cheers Chris, i think id be happy with around the 450.00 mark..

It owes me that much! The repaired seat-tube is perfect and the frame is now as good as new..Forks were N.O.S before the repaint :cool:

Ok now i need to put on my thinking cap :roll:
 
Might have to sell these to fund a road bike:

NOS Rock Shox SID's '97 or '98. Brand new never fitted & still boxed! Complete with instructions, boots, Judy butter & pump. long uncut 1/125" steerer.

IMG_1242.jpg


No idea what they might be worth so any help welcome.

Cheers for looking.
 
Just brought some Mag21's for the RTS so these Rock Shox Dart 3 will be needing to go.

Disc tabs, V mouts and lock-out switch.

Brought them brand new in November 2007, and as the RTS isnt my main use bike I have only used them about 10 times max :shock:

Cost me £120.......I'm now thinking IRO £80.......what do you guys think?

(sorry about the pic, I cropped and enlarged from a general bike shot!)
 

Attachments

  • DSC00572.JPG
    DSC00572.JPG
    44.3 KB · Views: 3,103
OK I have the following, any advice on price for parts or package would be welcomed.

20" Pace RC100
All original:
Pace bars,
Pace "reverse ahead style" stem,
RC30 Rigids,
RC35 suspension,
Magura hydrostops,
Bullseye cranks,
XT thumbies & mechs.
Original Pace hubbed wheelset (pre carbon fibre hubs http://www.retrobike.co.uk/gallery2/mai ... emId=45770 ) (wheelset 1)
Pace Carbon Front hub & hope Ti rear (wheelset 2)
Flite Ti
Original Pace paper work

The frame has been painted red in sections but is in good condition (Im happy to get it stripped, pollished, decalled& laquered before spraying so please quote as if it has been done.)

Ideally im still after a swap, but it seems swapping for cash is looking the more likely route to getting myself a pace I can actually straddle!
 
Giant Cadex HCM 3

Can anyone tell me how much this could be worth?

Gear: rear STX
Front: alivio
crank acera,


Foto-TDDPTG3O.jpg
 
Re: Giant Cadex HCM 3

ronnyf":3jpo79dq said:
Can anyone tell me how much this could be worth?

Gear: rear STX
Front: alivio
crank acera,


Foto-TDDPTG3O.jpg

£60 quid if it's in good nick?
 
JeRkY":37zqwpnn said:
OK I have the following, any advice on price for parts or package would be welcomed.

20" Pace RC100
All original:
Pace bars,
Pace "reverse ahead style" stem,
RC30 Rigids,
RC35 suspension,
Magura hydrostops,
Bullseye cranks,
XT thumbies & mechs.
Original Pace hubbed wheelset (pre carbon fibre hubs http://www.retrobike.co.uk/gallery2/mai ... emId=45770 ) (wheelset 1)
Pace Carbon Front hub & hope Ti rear (wheelset 2)
Flite Ti
Original Pace paper work

The frame has been painted red in sections but is in good condition (Im happy to get it stripped, pollished, decalled& laquered before spraying so please quote as if it has been done.)

Ideally im still after a swap, but it seems swapping for cash is looking the more likely route to getting myself a pace I can actually straddle!

any help, I have a list of prices in mind I would just like some one elses ideas so I know if im being silly in any way.

I was always a little sceptical as to wether this thread would work :?
 
Status
Not open for further replies.

Latest posts

Back
Top