My first Restoration - Clockwork - Finished Pg4!!

is the stem being powdered to match too?

Click to expand...

Yes, but haven't decided if it will be silver or black......

Vey nice build. I like the combination of the dark/black frame and the golden rims. And the Logic cranks allso makes it look very retro - with it bigish rings and rather thin crank arms! Congrats on the build!

Coming along brilliantly, Paul

I think the rims and the amberwalls look ace together and with a fresh powdercoat they will stand out even more. If you're keeping a silver seatpost I'd also deffo go with a silver stem & bars if it were mine

Nice!

Those Orange bikes are growing on me...

GOOD JOB MATE, WELL DONE, YOU MUST BE PLEASED...?........

Paul Eggleton":botyqlkr said:

Tioga Psycho and Panaracer Dart.

Click to expand...

Got some on the way, should look good.

Well, I had meant to strip this back down and do the powder coating but i've been enjoying it too much. However, I've just won these RC35's on the bay and bought this stem. Not sure if the stem will look right but it will get me rolling.

The alternative is to swap the steerer for a threaded one....

Whilst it's apart it will get powder coated!

Back from powder coating


Stickers on, courtesy of Gil


Also had the stem and brake levers done.

All done by Banbury Powder Coating.

Looking good

Finally finished and back together. Very happy with the way it's turned out. Need to do something with the headset to tidy it up but I probably will leave it for a while.

I'll take some better pics in better light.







Frame: Orange Clockwork (believe its around '92)

Fork: RC35's

Headset: Ultegra 105
Stem: Kona
Handlebar: PACE RC130
Grips: Cheapo local bike shop ones
Barends: na

Brakes: XT 737
Brake Pads: XT
Brake Cables: Yes
Cantilever cable hangers: XT and Rocker on front.
Brake Levers: DX MT63's

Shifters: XT Thumbshifters
Front Derailleur: XT 737
Rear Derailleur: XT 737
Derailleur Cables: 2
Cassette: XT 737
Chain: SRAM
Cranks: Ritchey Logic
Crank Bolts: STD
Chainrings: Pace x3
Chainring bolts: Anodised
Bottom Bracket: XTUN72
Pedals: XT737 SPD

Hub Skewers: XT
Rims: Mavic Lemon 517's
Hubs: XT 737
Nipples: STD
Spokes: STD
Tyres: Panaracer Dart (Fr) and Tioga Pyscho (Rr)
Tubes: Black

Saddle: Flite
Seatpost: Cheapo alloy
Seatpost Binder: XT QR

Total build cost = £790 :shock: :shock:

Had the brake levers and stem powder coated as well and Tim sorted me with a threaded steerer so I didn't use the controltech one.

Thanks to Tim (justbackdated) for sorting all the fork bits to for me and Gil for the stickers.

Right whats next!!!