Steel F+F Audax/fast tourer frame/set wanted, ~57-58

james-o

Dirt Disciple
Looking for a steel frameset for rim brakes, somewhere along the line between an Equilibrium 853 or a lugged level top tube audax/light touring frameset from a custom builder. Full bike possibly of interest - wouldn't discount it if the frameset was right.

Frame or frame+forks, either of interest.

57 - 57.5 square C-C equivalent, or close to.

Must have
- steel fork or a trad 1" or 1 /18" head tube to suit an aftermarket fork
- rim brakes, deep 57mm drop calipers or cantis, calipers preferred
- eyelets for guards
- 130mm rear end
- room for spacers on the steerer tube if a fork is included

There are a few options new eg Spa or Thorn but they're not quite what I'm after. Got a long Audax event this summer and the carbon fork on my old winter road bike is at retirement age.
 
Re:

Hi, I have something that might be of use.
Only picture I have is ‘as received’ and I’ve stripped down to F&F currently.
I can measure over the weekend. I think it fits your requirements.
Mat

Oh... fillet brazed and I think 853
 

Attachments

  • 169BF1AA-7DCA-4800-BA53-CCC3071C5DB8.jpeg
    169BF1AA-7DCA-4800-BA53-CCC3071C5DB8.jpeg
    84.5 KB · Views: 554
Re: Steel F+F Audax/fast tourer frame/set wanted

Hi Mat, that looks good, interested. Any references back to the original spec and geometry would be useful.
 
I have a Dave Yates Custom built tourer Fillet brazed 853 its suffered from stone chips but no dents or damage.

Stand over height is 85cm
Top tube centre to centre 57cm
Seat tube centre to top 55.5cm
Head tube 21.5
Down tube centre to centre 64cm

£300 posted
 

Attachments

  • Dave Yates 1.jpg
    Dave Yates 1.jpg
    244.8 KB · Views: 530
  • Dave Yates 2.jpg
    Dave Yates 2.jpg
    223.7 KB · Views: 530
  • Dave Yates 3.jpg
    Dave Yates 3.jpg
    170.3 KB · Views: 530
  • Dave Yates 5.jpg
    Dave Yates 5.jpg
    167.6 KB · Views: 531
  • Dave Yates 6.jpg
    Dave Yates 6.jpg
    127.3 KB · Views: 531
  • Dave Yates 7.jpg
    Dave Yates 7.jpg
    193.7 KB · Views: 531
  • Dave Yates 8.jpg
    Dave Yates 8.jpg
    131.5 KB · Views: 530
Re:

KB, that's nice, do you have the head/seat angles to hand? The pic perspective makes it look odd but I expect that's all it is, photo angles.
 
No it is odd 73 seat and 73.5 head as I said it was custom built :LOL: it's only had 2 owners from new and I know both of them first owner sold it on after going titanium and the second owner (10 yrs) has gone carbon. Built in 1984 and original paint I'm selling it on be half of the 2nd owner.
 
Re: Steel F+F Audax/fast tourer frame/set wanted

james-o":hdxdoab0 said:
Hi Mat, that looks good, interested. Any references back to the original spec and geometry would be useful.

Hi, it’ll take me a couple of days to grab this info... but will get back to you. :D
 
Re:

Thanks KB. Not unusual angles but a bit steep up front for my tastes. Shame, as the head tube is wonderful : )
 
Re: Steel F+F Audax/fast tourer frame/set wanted

MatBH5":36gmai31 said:
Hi, it’ll take me a couple of days to grab this info... but will get back to you. :D
No problem, thanks
 

Latest posts

Back
Top