degreeser advise

jgjones095 · Dec 3, 2015

Hi all

Just wondering on what degreeser to get for the bike build?
I'd like to clean and re grease everything including hubs etc.

I'd prefer something that can be bought locally.

Years and years ago I remember using cirus degreaser from halfrauds

davidj · Dec 4, 2015

Re:

I use whatever is to hand, kitchen roll for bearings and races, wd40 and a tooth brush on lightly soiled chains and cassettes, white spirit on badly soiled chains followed by an overnight soak in 10w40.

Sketchyxup · Dec 4, 2015

Re:

Go to your local home bargain type store and buy some of this:

Its without doubt the best degreaser iv ever used, it brought and old chain and cassette up to looking box fresh with minimal effort. No idea whats in it but for cleaning grease off metal bits its difficult to beat. It rinses off easily with water too, iv got a stash of the stuff in the garage now.

The History Man · Dec 4, 2015

Diesel works well.

kipperthedog · Dec 4, 2015

Re:

Or 50:50 diesel

etrol.

02gf74 · Dec 5, 2015

Re:

Degrease, solvent like white spirit will di the job, even petrol as long as you are working outdoors away from flames and sparks (the ignition sort not the mael brothers)

xerxes · Dec 5, 2015

Re:

I use car engine degreaser, something like Gunk, you can rinse things off with hot water afterwards and put them on the radiator to dry thoroughly before re-greasing.

hamster · Dec 8, 2015

I use Fenwicks. You can also dilute it in water as a bike wash.

degreeser advise

jgjones095

Old School Hero

davidj

Senior Retro Guru

Sketchyxup

Retro Guru

The History Man

kipperthedog

Senior Retro Guru

02gf74

Old School Grand Master

xerxes

Old School Grand Master

hamster

Retro Wizard

Similar threads

Latest posts