Manitou forks - assembly issue

twain · Oct 27, 2014

Hi,

just a quick quezzy about assembling a fork of mine.
Its a Manitou Xvert with TPC damping.
the TPC adjustment on the lower left leg is being a bit difficult. the bolt that fixes the damping rod to the lower just spins around, so never actually tightens up properly - everytime i compress the legs, the allen bolt moves out a little, so you can see that it hasn't tightened up properly.

anyone got any advice as to how to get this tightened up?

xam1 · Oct 27, 2014

Re:

Keep the fork compressed and same time tighten that lower bolt.

twain · Oct 27, 2014

Re: Re:

xam1":3c7yykk8 said:
Keep the fork compressed and same time tighten that lower bolt.

ive tried that, and it would work if it was on the spring side, but this is the damper side, no compression force to help keep it firmly against the bottom of the lower....

cant remember it being a problem the last time i took this apart...???!!! GRRRRRR

dyson · Nov 30, 2014

I had this same problem in the end they got sold on! Robmac on here bought them so maybe ask him if he got them rebuilt.

twain · Nov 30, 2014

Re:

I'll sell them to robmac then! Just bought 2 sets of forks!cant be arsed anymore.

Andy R · Dec 2, 2014

Drill/driver but keep the torque set low otherwise you'll just rip the end off the damper rod.

Manitou forks - assembly issue

twain

xam1

Old School Hero

twain

dyson

Retro Guru

twain

Andy R

Senior Retro Guru

Similar threads

Latest posts