Marzocchi Z4 Servicing Problem

dek1165

Old School Hero
Evening All,
My mate is servicing some Z4's that need the oil seals replacing and he believes a special tool is required to remove the worn oil seals. Do any of you know if that's correct and where he can find one? Also he needs a lower leg protector for extraction and an oil seal press. Any idea's?

Appreciate your help.

cheers

Jon
 
a big flat screwdriver will pop the old seal out and a 1/2 inch drive 30mm socket with a hammer (softly) will put the new seal back in ;)
 
Back
Top