Crank removal tool (current tool too narrow)

danbrad2000 · Jun 10, 2015

Hi Guys,

Ive got a crank that ive never come accross that i cant remove. My crank tool is too narrow so wont fit in to remove it. I think its an italian crank. Any ideas where i can get the wider crank tool from?

Thanks,

Dan

originalshinkicker · Jun 10, 2015

danbrad2000":1agz857x said:
Hi Guys,

Ive got a crank that ive never come accross that i cant remove. My crank tool is too narrow so wont fit in to remove it. I think its an italian crank. Any ideas where i can get the wider crank tool from?

Thanks,

Dan

If you have a std extractor that fits Campagnolo/Shimano then its threads are 22+mm. Some cranks like TA and Stronglight are 23+mm so the std tool just slops around inside. Knowing the name of the crank or a good picture of the entire crank arm would help identify it if there are no other identifying marks on it.
Cheers
Neil

mattr · Jun 10, 2015

Some crank tools (most i've come across) have a reversible section, see if the thread on the other end of that is the right size......

suggers46 · Jun 10, 2015

Re:

I think I got my 23mm tool from Spa Cycles in Harrogate.

Crank removal tool (current tool too narrow)

danbrad2000

Dirt Disciple

originalshinkicker

mattr

Old School Grand Master

suggers46

Dirt Disciple

Similar threads

Latest posts