timdrayton1
Retro Guru
Need to get this lot shifted, so offers considered - pm me or emails [email protected]
Club roost IDB150 "Duralumin" 2014-T6/580mm/5degree alu flat bars weigh 165g. lovely condition, logos intact, some crimping from bar ends but not noticeable when grips fitted... - £6.00 posted
Giant Stem (well off a giant) black 90mm 6-10 degree rise 25.4 clamp - 1 bolt missing, good condition - £5 posted
Dia compe Cantis loads of pad left, front set only as pictured (no bolts tho!) - £5 posted
Velocity Stem, with Joe Murray stickers, fair condition some rust (see pics) but this should come off with wire wool, missing the expander and bolt, but has front two bolts for the bar, 100mm reach and was used with a 1,1/8 fork - £5 posted
Bar ends, not sure of brand, no bolts, some rust - £4 posted
Deore 9 speed rear mech, scruffy and has a non original bolt through one of the jockeys, but all working and springs and pivots have no play - £6 posted
Shimano Hybrid x3 speed front mech, clamp size is about 28mm scruffy but working - £4 posted
sram 8 speed grip shifters, got these for a build 3 speed (left shifter) is fine, but 8 speed doesnt hold together, so best for parts? - £5 posted
Club roost IDB150 "Duralumin" 2014-T6/580mm/5degree alu flat bars weigh 165g. lovely condition, logos intact, some crimping from bar ends but not noticeable when grips fitted... - £6.00 posted
Giant Stem (well off a giant) black 90mm 6-10 degree rise 25.4 clamp - 1 bolt missing, good condition - £5 posted
Dia compe Cantis loads of pad left, front set only as pictured (no bolts tho!) - £5 posted
Velocity Stem, with Joe Murray stickers, fair condition some rust (see pics) but this should come off with wire wool, missing the expander and bolt, but has front two bolts for the bar, 100mm reach and was used with a 1,1/8 fork - £5 posted
Bar ends, not sure of brand, no bolts, some rust - £4 posted
Deore 9 speed rear mech, scruffy and has a non original bolt through one of the jockeys, but all working and springs and pivots have no play - £6 posted
Shimano Hybrid x3 speed front mech, clamp size is about 28mm scruffy but working - £4 posted
sram 8 speed grip shifters, got these for a build 3 speed (left shifter) is fine, but 8 speed doesnt hold together, so best for parts? - £5 posted
