SS / Fixed Gear Parts & Top Tube Cable Clamps.

[Dale cannon]

Looking for a chainset or arms and rear or pair of 700c wheels with a flip flop hub.

Ideally in silver and retro looking if possible. Not looking for anything too fancy.

Also looking for a nice set of top tube cable clamps again in silver.

Many thanks in advance.

 

[hamster]

Mismatched pair of Campag 1998ish Veloce / 1990ish Athena 170mm cranks any good? £25 posted.

 

[Dale cannon]

Thanks for the offer but I'd rather have a matching pair.

 

[Brabande]

Re:

I've got new Shimano toptube cableclamps, you have PM

 

[Jonny69]

Would you be interested in a pair of alloy 36H polished alloy rims on Novatec hubs with stainless db spokes? The rims are like an early aero bullet section, double fixed hubs but you can put a freewheel on one side, bearings in perfect condition and they are really nice looking wheels. Would like £60 for them and either pick up from near Heathrow or postage on top?

 

[Dale cannon]

Would you be interested in a pair of alloy 36H polished alloy rims on Novatec hubs with stainless db spokes? The rims are like an early aero bullet section, double fixed hubs but you can put a freewheel on one side, bearings in perfect condition and they are really nice looking wheels. Would like £60 for them and either pick up from near Heathrow or postage on top?

Is it possible to get a picture or two please?

 

[Jonny69]

Will take some tonight - bear with me...

In the meantime, it's these ones. Though I know that's not a great pic because the lighting is bad and they're dirty:

 

[Blacktopdisciple]

Got a pair of Goldtec Hubs laced to DT R1.1 rims, plus two sprockets, lockrings and a fixed gear multitool. Might be a bit modern. Details below, let me know if interested. Hope you are happy with the frame.

Fixed/ Singlespeed Wheelset

Goldtec Track Hubs with rear being 120mm OLD. Sapim CX ray areo spokes and alloy nipples. DT R 1.1 single eyelet rims. Hardly used with no rim wear on rear and virtually none on front. Run pretty true but for best result would benefit from a quick true up. Front built with radial lacing, rear is 3 cross. Built with spoke washers under the heads. Threads on rear hub are good. It is double fixed. Bearings are smooth on both wheels with no play. Axle bolts are titanium on both wheels. Im throwing in the tyres which have no wear and innertubes which hold air. £150 posted or £130 collected from Glasgow. Photos below;

10) Euro Asia Imports steel 20 teeth 1/8th fixed sprocket with ISO standard 1.375x24tpi threading. Very good condition with hardly any wear to the teeth and threads in good order. Velo Solo alloy 18 teeth 1/8th fixed sprocket with ISO threading. Very good condition, hardly any ware to teeth and threads in good order. Token alloy lockring with 1.29x24tpi threading in excellent condition. Shimano Dura Ace NJS approved steel lockring with same threading as Token. Excellent condition. Plus a freebie Trixie lockring and tracknut tool. £19:50 including postage.

Pictures; Scroll down the page for all pictures

https://www.flickr.com/photos/16704837@ ... 0352721291

 

[Jonny69]

Here we go, some closer pics:

Rim width is 18mm on the outside and they are about 22mm deep.