Sold: Ragley Mmmbop and Manitou Mattoc

ishaw

Gold Trader
GT Fan
Feedback
View
Bought these last year as a project to try 27.5 out for size. Haven't done anything with them aside from cleaning and adding a few things, such as new headset bearings and cable guides (bought frame without them).

Frame is 20 inch c2t and has no dents or dings. The paint has had it's fair share of chips and rubs, pictures should show. I did start to touch them up but didn't have the right colour silver so stopped. Worst rubbing is on seat tube where previous owner ran a dropper with external hose which rubbed through the paint. It still looks decent from a distance.

Frame has routing for internal dropper and comes with the shimano rear bolt through axle.

Forks are Manitou Mattoc Comp. Previous owner had them serviced before I bought them so they are in fine fettle in and out. Also included are a set of new wiper seals so you can service them in future when the time comes. Stanchions are extremely clean, lowers too aside from a few marks to the decals and the usual signs of use.

After just £220 for the package plus post. UK only please. It owes me much more but it has been hanging in the garage since I bought it all.

I did buy a lot of other stuff for it that is available should you be up for any other bits, new wheels, tyres and tubes, seat posts, stems, bars, chain device, cranks etc.
 

Attachments

  • PSX_20200301_161513.webp
    PSX_20200301_161513.webp
    34.7 KB · Views: 1,607
  • PSX_20200301_161532.webp
    PSX_20200301_161532.webp
    27.3 KB · Views: 1,607
  • PSX_20200301_161610.webp
    PSX_20200301_161610.webp
    29.6 KB · Views: 1,607
  • PSX_20200301_161610.webp
    PSX_20200301_161610.webp
    29.6 KB · Views: 1,607
  • PSX_20200301_161640.webp
    PSX_20200301_161640.webp
    20.6 KB · Views: 1,607
  • PSX_20200301_161657.webp
    PSX_20200301_161657.webp
    34.9 KB · Views: 1,607
  • PSX_20200301_161724.webp
    PSX_20200301_161724.webp
    25.1 KB · Views: 1,607
  • PSX_20200301_161750.webp
    PSX_20200301_161750.webp
    23.5 KB · Views: 1,607
Re:

More pics.
 

Attachments

  • PSX_20200301_161809.webp
    PSX_20200301_161809.webp
    30.5 KB · Views: 1,605
  • PSX_20200301_161825.webp
    PSX_20200301_161825.webp
    19.3 KB · Views: 1,605
  • PSX_20200301_161842.webp
    PSX_20200301_161842.webp
    26.6 KB · Views: 1,605
  • PSX_20200301_161903.webp
    PSX_20200301_161903.webp
    21.3 KB · Views: 1,605
  • PSX_20200301_161921.webp
    PSX_20200301_161921.webp
    24.8 KB · Views: 1,605
  • PSX_20200301_161936.webp
    PSX_20200301_161936.webp
    29.9 KB · Views: 1,605
  • PSX_20200301_161954.webp
    PSX_20200301_161954.webp
    31.8 KB · Views: 1,605
  • PSX_20200301_162007.webp
    PSX_20200301_162007.webp
    29.3 KB · Views: 1,605
Re: Re:

brocklanders023":39oau26j said:
Hmmmmmmm...... What is the top tube length mate?
24 inches/61cm measured from centre of seat tube to the centre of head tube.

I might throw it to the Ebay lions tomorrow as I have a listing offer and have chucked a few things up already. Would prefer it went to someone on here tbh.
 
Re:

Thanks for that. Having a think as I'm after a HT build but had planned to go down the steel route. Found a review of one of these so will have a read up. Don't hold it for me but I might come back knocking. :wink:
 
Re:

Bump. Prices for bikes and bits are crazy at the moment. I decided to hang on to it and build, but my energy went into a ti 29er and just can't see me building it now. As mentioned, plenty of new kit available to build this up, including new wheels (fulcrum or crossnax), tyres to suit, drive train bits (zee, xt, xo, x9), cranks, chain guards/devices, bars, stems, seat posts, saddles etc.
 
Back
Top