Silverfish 1992 Another Yeti ARC

And good to see the CycleArt custom paint decal is still on there.
This frame was on display in Bromley Bike in 92, then bought by the guy I got it from in 93. He didn’t really know why it had a custom paint job but it’s the original paint from 92 when he first drooled over it and 93 when when he used a student loan to buy it 🤣

Forgot to look out for the serial number
Will do it next time I’m in the cave 🤦
 

Attachments

  • IMG_6319.webp
    IMG_6319.webp
    101.6 KB · Views: 5
Got some cool shit to hang off this 🕺
First off a NOS Ringle Moby 😍

Also have most of the other parts ready to go, tho I think I’m going to get Dan to machine a relief groove into the King headset cups before I fit the headset.

It’s basically a shallow machined groove, about 2x0.5mm wide into the cup where it gets inserted which reduces the bursting force exerted on the very end of the head tube by around 35%.
 

Attachments

  • IMG_6326.webp
    IMG_6326.webp
    108.5 KB · Views: 5
But back to my previous question, does anyone know what size rivets I need to re-fit the cable guide?
And can anyone recommend me a pop rivet tool?
 
the hole looks about 2 to 3mm if you have any nails knocking about test fit them and just measure just a cheap handheld rivet gun will do the trick mate but becareful you dont jump of the cable guids when you do it i would put something round the frame just incase mate this is going to be a beatiful bike when you done love the seatpost
 
Back
Top