Shimano mechs, BBs, USE suspension post

[russ77]

I’ve seen something on here I really want. I’m trying to be disciplined and plan to sell a load of gear to fund it before I even make an offer… If I'm out on prices please make me an offer!

Specialized 73x107mm square taper bottom bracket. Feels smooth and tight. No corrosion and threads look good £10 posted

https://live.staticflickr.com/65535/504 ... ef2a_b.jpg
https://live.staticflickr.com/65535/504 ... c4f8_b.jpg

Shimano UN52 73x113mm square taper bottom bracket. Bearings lovely and smooth. Marking on case from plastic cup. Threads look good. £10 posted

https://live.staticflickr.com/65535/504 ... 1d43_b.jpg
https://live.staticflickr.com/65535/504 ... bb4e_b.jpg
https://live.staticflickr.com/65535/504 ... c34f_b.jpg

Shimano RD-M739 rear mech. Pretty scratched up but cleaned and recently greased. £14 posted

https://live.staticflickr.com/65535/504 ... 5b0d_b.jpg
https://live.staticflickr.com/65535/504 ... 9f09_b.jpg

Shimano FD-M565 front mech. Top pull top swing. Bit grubby and surface rust to the cage. £7 posted

https://live.staticflickr.com/65535/504 ... 0cce_b.jpg
https://live.staticflickr.com/65535/504 ... c37e_b.jpg

Shimano FD-M567 front mech. Top pull bottom swing. Needs a clean. £7 posted

https://live.staticflickr.com/65535/504 ... 4af1_b.jpg
https://live.staticflickr.com/65535/504 ... c872_b.jpg
https://live.staticflickr.com/65535/504 ... 4af1_b.jpg

Ritchey black clipless pedals. Bit rusty on the mechanism, paintwork chipped as always but would clean up well. £12 posted

USE suspension seatpost. 25.0mm diameter for use with their standard shims. Can’t find any in my toolbox but they’re still available. I was always too heavy for this so never got the benefit of it. Seems to bounce still. Boot at the top is slightly split. £35 posted

https://live.staticflickr.com/65535/489 ... 3356_b.jpg
https://live.staticflickr.com/65535/489 ... 6e4e_b.jpg



Sold items:
1996 GT LTS-2 frame 19” C-T. I’ve never built this up having bought it from eBay earlier this year. It’s got a small dent in the side of the top tube but otherwise looks to be in good nick for its age. Would polish up very nicely. Just want what I paid for it. £50 + postage SOLD posted 28/10/19.
https://live.staticflickr.com/65535/489 ... c8c3_b.jpg
https://live.staticflickr.com/65535/489 ... 83dc_b.jpg
https://live.staticflickr.com/65535/489 ... 8928_b.jpg
https://live.staticflickr.com/65535/489 ... fed4_b.jpg
https://live.staticflickr.com/65535/489 ... 66b2_b.jpg
https://live.staticflickr.com/65535/489 ... 88db_b.jpg
https://live.staticflickr.com/65535/489 ... d842_b.jpg
https://live.staticflickr.com/65535/489 ... f405_b.jpg
XT thumbshifters. Paint on clamps a bit worn. Top caps are fine. Hidden eighth click. Work faultlessly but just not my thing. £42 posted SOLD for £60 with the Deore shifters
https://live.staticflickr.com/65535/489 ... a97d_c.jpg
https://live.staticflickr.com/65535/489 ... 8f3a_b.jpg
Deore thumbshifters. With the hidden eighth click. Bit of rust on clamps but top caps look OK. A rub down and spot of paint on the clamps and these would look great. Work really well but I just never got on with them. £28 posted SOLD for £60 with the XT shifters
https://live.staticflickr.com/65535/489 ... e2ed_c.jpg
https://live.staticflickr.com/65535/489 ... 04b5_b.jpg
Shimano LX / Mavic 237S wheelset. Rims are in really nice condition. Bearing smooth but drag a little. Could do with new grease I expect. Label has gone from the front hub. Sold on eBay
https://live.staticflickr.com/65535/489 ... cd6b_c.jpg
https://live.staticflickr.com/65535/489 ... 7783_b.jpg
https://live.staticflickr.com/65535/489 ... 126c_b.jpg
https://live.staticflickr.com/65535/489 ... 9d7f_b.jpg
https://live.staticflickr.com/65535/489 ... e762_b.jpg
Shimano LX M600 V brakes. Were removed from a bike about a year ago and were working fine then. I don’t have any bolts or noodles for these though. They have worn cartridge type pads on them. Sold for £8
https://live.staticflickr.com/65535/489 ... 3076_c.jpg
RD M739 rear mechs. I have two of them. One is dirty, one is clean. The clean one’s tension plate has spun round too far. I’m sure I could fix this. Looks like the cast stop is still intact. £12 each posted, dirty one SOLD posted 28/10/19
https://live.staticflickr.com/65535/489 ... bacc_c.jpg
https://live.staticflickr.com/65535/489 ... ddcf_b.jpg
https://live.staticflickr.com/65535/489 ... 53da_b.jpg
https://live.staticflickr.com/65535/489 ... 89b6_b.jpg
Tange Switchblade fork. Currently has a 175mm 1” steerer installed in its 1.125” crown using a Pace shim. Also have a 1” crown I will include. Paint is OK in a very dark blue metallic. Sticker has gone from the 1.125” crown. Really nice fork but I’m just too heavy for it. The legs vibrate under braking and frighten me a bit. SFN installed. SOLD on eBay for £120
https://live.staticflickr.com/65535/489 ... c8d6_c.jpg
https://live.staticflickr.com/65535/489 ... dc6d_b.jpg
https://live.staticflickr.com/65535/489 ... 1b91_b.jpg
https://live.staticflickr.com/65535/489 ... e96d_b.jpg
https://live.staticflickr.com/65535/489 ... 33c4_b.jpg
https://live.staticflickr.com/65535/489 ... 7d4e_c.jpg
https://live.staticflickr.com/65535/489 ... 80c2_b.jpg
https://live.staticflickr.com/65535/489 ... 1612_b.jpg
https://live.staticflickr.com/65535/489 ... c7bc_b.jpg

Pace RC-35 AB fork. Has a 185mm 1” steerer installed in its 1.125” crown. There’s a Pace reducer shim installed. I replaced the elastomers in this ten years back. I’ve not used it much since then and it still goes up and down nicely. SFN installed. SOLD on eBay for £186
https://live.staticflickr.com/65535/489 ... 1c44_c.jpg
https://live.staticflickr.com/65535/489 ... 03d4_c.jpg
https://live.staticflickr.com/65535/489 ... 24f2_b.jpg
https://live.staticflickr.com/65535/489 ... 7099_b.jpg

 

[thosewerethedays]

Re:

Hi,

Dirty xt rear mech please.

Please pm with pp details

Regards

 

[lensmansteve]

Re: LTS 2 frame and lots of bits

I'd like the lx v-brakes.. Let me know your PayPal asap..
Cheers, Steve.

 

[fiendish feet]

Re:

Hi Interested in the Use seatpost could you tell me the length 330 or 400mm
Cheers

 

[RetroRider_IT]

Re: LTS 2 frame and lots of bits

Interested on TANGE forks and thumbshifters ....

You have PM

Thank you

 

[The History Man]

Re: LTS 2 frame and lots of bits

Would you take 60 for both pairs of shifters?

 

[fiendish feet]

Re: LTS 2 frame and lots of bits

I will pass on the U.s.e seatpost
Gone bikepacking .

 

[russ77]

Re: LTS 2 frame and lots of bits

Would you take 60 for both pairs of shifters?

You betcha. I'll PM you payment details and I can send them off this week. Cheers, T..

 

[The History Man]

Re: LTS 2 frame and lots of bits

Payment sent

 

[russ77]

Re:

BUMP!

Any offers? Cheers, T..