Forgot I had these until today. They are 1 1/8 straight steerer atv190mm ish long. Started life as u-turn air forks but the u-turn failed and I couldn't get soares so converted to fixed travel (though can be internally adjusted using spacers on the air side).
Ive stripped and rebuilt them aside from filling the damper with oil as I ran out. They have a remote lockout damper and I have a lockout lever but not pictured.
There are a couple of marks on the stanchions but nothing that impacts performance. Lowers have marks from use and some patches of discolouration under the clear cost, but pretty presentable.
All they need is some oil and they will be good to go. They have been greased internally and at the seals (Judy butter) and foam rings soaked in the right oil too.
Just after £40 plus post.
Ive stripped and rebuilt them aside from filling the damper with oil as I ran out. They have a remote lockout damper and I have a lockout lever but not pictured.
There are a couple of marks on the stanchions but nothing that impacts performance. Lowers have marks from use and some patches of discolouration under the clear cost, but pretty presentable.
All they need is some oil and they will be good to go. They have been greased internally and at the seals (Judy butter) and foam rings soaked in the right oil too.
Just after £40 plus post.
