Rock shox Judy forks maybe up for swap

[rojo]

I bought these Judy forks last week, i knew the steerer was to short for me but thought it be easy to find a crown/steerer longer. But not having much luck at all with this

So if i can't find, these will be up for swap for a set of forks with a long steerer on them.

Its Judy XC forks very good condition 144mm threaded steerer, come in original box and two tubs of judy butter.

What you got??????

 

[kase1983]

Bummer i wanted to buy the second to you and your not using them!

 

[mfh126]

You might want to indicate how long of a steerer you need.

 

[rojo]

Bummer i wanted to buy the second to you and your not using them!

I thought it would be easy to find a crown/steerer though sorry

 

[rojo]

You might want to indicate how long of a steerer you need.

The forks will be going on a frame with headtube size of 135mm or 150mm and can be threaded headset or ahead. So what ever lengths i need for that , not sure what that is

 

[mfh126]

You might want to indicate how long of a steerer you need.

The forks will be going on a frame with headtube size of 135mm or 150mm and can be threaded headset or ahead. So what ever lengths i need for that , not sure what that is

How quickly we forget... :roll:

FluffyChicken posted this info in your wanted ad:

THREADED
150 steerer would need.. Just add the stack height to 150mm.
So a Shimano headset with say 37mm stack height. Then you would need at least 187mm long and threaded a somewhat below that and any longer still needs to have threading it this area.

THREADLESS
it been mentioned a few times.
150 + headset stack(say 30) + stem stack (say 40) - few mm (3) = ~220mm at least.

 

[rojo]

You might want to indicate how long of a steerer you need.

The forks will be going on a frame with headtube size of 135mm or 150mm and can be threaded headset or ahead. So what ever lengths i need for that , not sure what that is

How quickly we forget... :roll:

FluffyChicken posted this info in your wanted ad:

THREADED
150 steerer would need.. Just add the stack height to 150mm.
So a Shimano headset with say 37mm stack height. Then you would need at least 187mm long and threaded a somewhat below that and any longer still needs to have threading it this area.

THREADLESS
it been mentioned a few times.
150 + headset stack(say 30) + stem stack (say 40) - few mm (3) = ~220mm at least.

So threaded with the 135mm headtube would be 172 needed and threadless 210mm

 

[rojo]

So steerer size needed is

Threaded 187mm or 172mm

Threadless 210mm or 220mm

 

[rojo]

These have now gone