- Feedback
- View
Interest on here 1st, then PM please to seal the deal
Thanks
1. Ritchey Force Lite NOS: made by Nitto, 1 1/8" quill type stem, mountain bike, silver colored,150mm length with 10 degree rise. £15.00 posted UK.
2. Hope DH-4 front disc assembly, 180mm rota, Hope pro lever and DH-4 caliper, and also braided and black hoses supplied, good solid feel to brake and some pad use left also, all four pots are free moving£30.00 posted sold pp
3. Seat post taken from a GT 31.6 Dia with usable length of 255mm from min insertion to seat rail very clean, just a couple of marks from insertion which you can see on the pics, £7.00 posted
4. Suntour XC Comp front mech with 31.8 dia clamp in bottom pull flavour, the mech is almost NOS only being used for a handful of short dry rides. £15.00 posted sold
5. LX M571 front mech with a bottom pull and a 31.8 clamp seen little use
£8.00 posted
6. Pace RC35 crown Inch 1/4 type which uses a shim to convert into Inch1/8, (Inch shims are also available from Justbackdated). You get in this sale the crown, a 1”1/8 shim, and one of the steerers. The choice of stems are 127mm threaded, 150mm threaded, and 160mm a-head, note there is some slight damage to the a-head steerer as pictured but I used this for years on my RC36s with no problems.
£20.00 posted
1.
2.
3.
4.
5.
6.
Kona Project two triple butted forks ‘97, 1” A-head steerer 175mm from crown race to top, axle to crown race is 410mm, as you can see from the pics they have a fresh candy green powder coat,£40.00 posted SOLD
Hope Endura-4 rear disc assembly 160mm rota, Hope pro lever and the Endura-4 caliper, complete with braided hose, good solid feel to brake with some pad wear left, all 4 pots are free moving, small grub screw missing which locks the lever reach screw, doesn’t affect use, I will search for this over next few days. £35.00 posted SOLD
Thanks
1. Ritchey Force Lite NOS: made by Nitto, 1 1/8" quill type stem, mountain bike, silver colored,150mm length with 10 degree rise. £15.00 posted UK.
2. Hope DH-4 front disc assembly, 180mm rota, Hope pro lever and DH-4 caliper, and also braided and black hoses supplied, good solid feel to brake and some pad use left also, all four pots are free moving£30.00 posted sold pp
3. Seat post taken from a GT 31.6 Dia with usable length of 255mm from min insertion to seat rail very clean, just a couple of marks from insertion which you can see on the pics, £7.00 posted
4. Suntour XC Comp front mech with 31.8 dia clamp in bottom pull flavour, the mech is almost NOS only being used for a handful of short dry rides. £15.00 posted sold
5. LX M571 front mech with a bottom pull and a 31.8 clamp seen little use
£8.00 posted
6. Pace RC35 crown Inch 1/4 type which uses a shim to convert into Inch1/8, (Inch shims are also available from Justbackdated). You get in this sale the crown, a 1”1/8 shim, and one of the steerers. The choice of stems are 127mm threaded, 150mm threaded, and 160mm a-head, note there is some slight damage to the a-head steerer as pictured but I used this for years on my RC36s with no problems.
£20.00 posted
1.
2.
3.
4.
5.
6.
Kona Project two triple butted forks ‘97, 1” A-head steerer 175mm from crown race to top, axle to crown race is 410mm, as you can see from the pics they have a fresh candy green powder coat,£40.00 posted SOLD
Hope Endura-4 rear disc assembly 160mm rota, Hope pro lever and the Endura-4 caliper, complete with braided hose, good solid feel to brake with some pad wear left, all 4 pots are free moving, small grub screw missing which locks the lever reach screw, doesn’t affect use, I will search for this over next few days. £35.00 posted SOLD
