ritchey logic crank and bb, cannondale hyperlite bars

[eejoor]

i was keeping these for a cannondale m800 build, but they can go ...

ritchey logic 180mm crank, standard 110/74

previous owner drilled a smale hole in the drive side crank to put a smal screw in it. this little hole prevents the chain to fall between chainring and crank arm

other than than that it is ok with good taper and tread, may benefit from a polish and new decal.

£30 + postage

ritchey seat post

27.2 mm and 310 mm long, so correct size for a 3.0 frameset

£ 20 + postage


ritchey logic pro bb 120 mm
comes with the correct bearings (not on pic)

£20 + postage

cannondale hyperlite steerer. some scratches from removing stuck gripshifts, but these will be under the grips.
uncut, but need to check on size

£25 + postage

 

[benbonty]

I'm interested in the BB, what would postage be to the uk please?

 

[eejoor]

pm send

 

[stumpjumper1990]

If Ritchey seatpost is 30.0mm I'm interested!!

Cheers,
Bart

 

[benbonty]

Sorry mate the postage kills it for me so I'm out on the BB.

If the seatpost is the right size for a 3.0 Cannondale, it's a 27.2

 

[eejoor]

weekend bump

 

[eejoor]

sunday bump,

open to offers

 

[eejoor]

on ebay now:

http://www.benl.ebay.be/itm/ritchey-log ... 19cb362ed2

http://cgi.benl.ebay.be/ws/eBayISAPI.dl ... 0783511075

http://cgi.benl.ebay.be/ws/eBayISAPI.dl ... 0783519955

 

[mtbvfr]

Hi Danny,

I am interested in the cranks and bottom bracket if you still have them available.

Thank you, Michael.