Hi
Surplus to requirements :roll:
I am selling this lovely Full 531 steel frame from the 70's from the austrian make Puch - it is the Royal Force model ( upper range model below the Vent Noir model)
Was also sold in the US as AD - Austro Daimler for higher end models
Very light with a frame at 1990 g and 730 g for the fork
Seat Tube C/C =53 cm
top tube C/C =57
Full Reynolds 531
rear width 125 mm
Seatpost diameter 27.2
Bottom Bracket French Thread 35x100
Fork Threading BSC 1 inch x 24 TPI
Pretty good paint condition for its age with some scratches . but nothing that can't be improved with touch up
Stickers in unequal state
Pickup possible in a suburb of Paris !
Else shipping in Europe - contact me for cost but should be 25/30 euros ( the french Post office now charge a supplement for bix boxes I am afraid) :roll:
Grab this nice frame for a little more than a song
that is 80 Euros - about 66.8 quids
Its also on the bay for other mortals but for more than you fellow retrobikers
If you need, can try to find a fitting bottom bracket for a little supplement :idea:
headset maybe but BSC stock in low compared to french stuff
Surplus to requirements :roll:
I am selling this lovely Full 531 steel frame from the 70's from the austrian make Puch - it is the Royal Force model ( upper range model below the Vent Noir model)
Was also sold in the US as AD - Austro Daimler for higher end models
Very light with a frame at 1990 g and 730 g for the fork
Seat Tube C/C =53 cm
top tube C/C =57
Full Reynolds 531
rear width 125 mm
Seatpost diameter 27.2
Bottom Bracket French Thread 35x100
Fork Threading BSC 1 inch x 24 TPI
Pretty good paint condition for its age with some scratches . but nothing that can't be improved with touch up
Stickers in unequal state
Pickup possible in a suburb of Paris !
Else shipping in Europe - contact me for cost but should be 25/30 euros ( the french Post office now charge a supplement for bix boxes I am afraid) :roll:
Grab this nice frame for a little more than a song
that is 80 Euros - about 66.8 quidsIts also on the bay for other mortals but for more than you fellow retrobikers
If you need, can try to find a fitting bottom bracket for a little supplement :idea:
headset maybe but BSC stock in low compared to french stuff
